e56c2267fd
Port of port-channel interface support that was implemented for the cisco core plugin - https://review.openstack.org/#/c/42037 Note that additional port-channel UT already existed. (Created during initial cisco core nexus subplugin -> ml2 cisco nexus md port.) See test_cisco_nexus.py module, NEXUS_PORTCHANNELS references. Closes-Bug: 1294900 Change-Id: Ifc64f605e5783ee1e85d66c87f422f64b47fa996
49 lines
1.7 KiB
INI
49 lines
1.7 KiB
INI
[ml2_cisco]
|
|
|
|
# (StrOpt) A short prefix to prepend to the VLAN number when creating a
|
|
# VLAN interface. For example, if an interface is being created for
|
|
# VLAN 2001 it will be named 'q-2001' using the default prefix.
|
|
#
|
|
# vlan_name_prefix = q-
|
|
# Example: vlan_name_prefix = vnet-
|
|
|
|
# (BoolOpt) A flag to enable round robin scheduling of routers for SVI.
|
|
# svi_round_robin = False
|
|
|
|
#
|
|
# (StrOpt) The name of the physical_network managed via the Cisco Nexus Switch.
|
|
# This string value must be present in the ml2_conf.ini network_vlan_ranges
|
|
# variable.
|
|
#
|
|
# managed_physical_network =
|
|
# Example: managed_physical_network = physnet1
|
|
|
|
# Cisco Nexus Switch configurations.
|
|
# Each switch to be managed by Openstack Neutron must be configured here.
|
|
#
|
|
# Cisco Nexus Switch Format.
|
|
# [ml2_mech_cisco_nexus:<IP address of switch>]
|
|
# <hostname>=<intf_type:port> (1)
|
|
# ssh_port=<ssh port> (2)
|
|
# username=<credential username> (3)
|
|
# password=<credential password> (4)
|
|
#
|
|
# (1) For each host connected to a port on the switch, specify the hostname
|
|
# and the Nexus physical port (interface) it is connected to.
|
|
# Valid intf_type's are 'ethernet' and 'port-channel'.
|
|
# The default setting for <intf_type:> is 'ethernet' and need not be
|
|
# added to this setting.
|
|
# (2) The TCP port for connecting via SSH to manage the switch. This is
|
|
# port number 22 unless the switch has been configured otherwise.
|
|
# (3) The username for logging into the switch to manage it.
|
|
# (4) The password for logging into the switch to manage it.
|
|
#
|
|
# Example:
|
|
# [ml2_mech_cisco_nexus:1.1.1.1]
|
|
# compute1=1/1
|
|
# compute2=ethernet:1/2
|
|
# compute3=port-channel:1
|
|
# ssh_port=22
|
|
# username=admin
|
|
# password=mySecretPassword
|