vmware-nsx/etc/neutron/plugins/nicira/nvp.ini
2013-10-03 16:42:04 +00:00

161 lines
6.2 KiB
INI

[DEFAULT]
# User name for NVP controller
# nvp_user = admin
# Password for NVP controller
# nvp_password = admin
# Total time limit for a cluster request
# (including retries across different controllers)
# req_timeout = 30
# Time before aborting a request on an unresponsive controller
# http_timeout = 10
# Maximum number of times a particular request should be retried
# retries = 2
# Maximum number of times a redirect response should be followed
# redirects = 2
# Comma-separated list of NVP controller endpoints (<ip>:<port>). When port
# is omitted, 443 is assumed. This option MUST be specified, e.g.:
# nvp_controllers = xx.yy.zz.ww:443, aa.bb.cc.dd, ee.ff.gg.hh.ee:80
# UUID of the pre-existing default NVP Transport zone to be used for creating
# tunneled isolated "Neutron" networks. This option MUST be specified, e.g.:
# default_tz_uuid = 1e8e52cf-fa7f-46b0-a14a-f99835a9cb53
# (Optional) UUID of the cluster in NVP. It can be retrieved from NVP management
# console "admin" section.
# nvp_cluster_uuid = 615be8e4-82e9-4fd2-b4b3-fd141e51a5a7
# (Optional) UUID for the default l3 gateway service to use with this cluster.
# To be specified if planning to use logical routers with external gateways.
# default_l3_gw_service_uuid =
# (Optional) UUID for the default l2 gateway service to use with this cluster.
# To be specified for providing a predefined gateway tenant for connecting their networks.
# default_l2_gw_service_uuid =
# Name of the default interface name to be used on network-gateway. This value
# will be used for any device associated with a network gateway for which an
# interface name was not specified
# default_interface_name = breth0
[quotas]
# number of network gateways allowed per tenant, -1 means unlimited
# quota_network_gateway = 5
[nvp]
# Maximum number of ports for each bridged logical switch
# The recommended value for this parameter varies with NVP version
# Please use:
# NVP 2.x -> 64
# NVP 3.0, 3.1 -> 5000
# NVP 3.2 -> 10000
# max_lp_per_bridged_ls = 5000
# Maximum number of ports for each overlay (stt, gre) logical switch
# max_lp_per_overlay_ls = 256
# Number of connections to each controller node.
# default is 10
# concurrent_connections = 10
# Number of seconds a generation id should be valid for (default -1 meaning do not time out)
# nvp_gen_timeout = -1
# Acceptable values for 'metadata_mode' are:
# - 'access_network': this enables a dedicated connection to the metadata
# proxy for metadata server access via Neutron router.
# - 'dhcp_host_route': this enables host route injection via the dhcp agent.
# This option is only useful if running on a host that does not support
# namespaces otherwise access_network should be used.
# metadata_mode = access_network
# The default network transport type to use (stt, gre, bridge, ipsec_gre, or ipsec_stt)
# default_transport_type = stt
# Specifies in which mode the plugin needs to operate in order to provide DHCP and
# metadata proxy services to tenant instances. If 'agent' is chosen (default)
# the NVP plugin relies on external RPC agents (i.e. dhcp and metadata agents) to
# provide such services. In this mode, the plugin supports API extensions 'agent'
# and 'dhcp_agent_scheduler'. If 'agentless' is chosen (experimental in Havana),
# the plugin will use NVP logical services for DHCP and metadata proxy. This
# simplifies the deployment model for Neutron, in that the plugin no longer requires
# the RPC agents to operate. When 'agentless' is chosen, the config option metadata_mode
# becomes ineffective. The mode 'agentless' is not supported for NVP 3.2 or below.
# agent_mode = agent
[nvp_sync]
# Interval in seconds between runs of the status synchronization task.
# The plugin will aim at resynchronizing operational status for all
# resources in this interval, and it should be therefore large enough
# to ensure the task is feasible. Otherwise the plugin will be
# constantly synchronizing resource status, ie: a new task is started
# as soon as the previous is completed.
# If this value is set to 0, the state synchronization thread for this
# Neutron instance will be disabled.
# state_sync_interval = 120
# Random additional delay between two runs of the state synchronization task.
# An additional wait time between 0 and max_random_sync_delay seconds
# will be added on top of state_sync_interval.
# max_random_sync_delay = 0
# Minimum delay, in seconds, between two status synchronization requests for NVP.
# Depending on chunk size, controller load, and other factors, state
# synchronization requests might be pretty heavy. This means the
# controller might take time to respond, and its load might be quite
# increased by them. This parameter allows to specify a minimum
# interval between two subsequent requests.
# The value for this parameter must never exceed state_sync_interval.
# If this does, an error will be raised at startup.
# min_sync_req_delay = 10
# Minimum number of resources to be retrieved from NVP in a single status
# synchronization request.
# The actual size of the chunk will increase if the number of resources is such
# that using the minimum chunk size will cause the interval between two
# requests to be less than min_sync_req_delay
# min_chunk_size = 500
# Enable this option to allow punctual state synchronization on show
# operations. In this way, show operations will always fetch the operational
# status of the resource from the NVP backend, and this might have
# a considerable impact on overall performance.
# always_read_status = False
[vcns]
# URL for VCNS manager
# manager_uri = https://management_ip
# User name for VCNS manager
# user = admin
# Password for VCNS manager
# password = default
# (Optional) Datacenter ID for Edge deployment
# datacenter_moid =
# (Optional) Deployment Container ID for NSX Edge deployment
# If not specified, either a default global container will be used, or
# the resource pool and datastore specified below will be used
# deployment_container_id =
# (Optional) Resource pool ID for NSX Edge deployment
# resource_pool_id =
# (Optional) Datastore ID for NSX Edge deployment
# datastore_id =
# (Required) UUID of logic switch for physical network connectivity
# external_network =
# (Optional) Asynchronous task status check interval
# default is 2000 (millisecond)
# task_status_check_interval = 2000