aodh/doc/source/configuration.rst

Configuration Options

Ceilometer specific

The following table lists the ceilometer specific options in the global configuration file. Please note that ceilometer uses openstack-common extensively, which requires that the other parameters are set appropriately. For information we are listing the configuration elements that we use after the ceilometer specific elements.

If you use sql alchemy, its specific parameters will need to be set.

Parameter	Default	Note
nova_control_exchange	nova	Exchange name for Nova notifications
glance_control_exchange	glance	Exchange name for Glance notifications
cinder_control_exchange	cinder	Exchange name for Cinder notifications
neutron_control_exchange	neutron	Exchange name for Neutron notifications
metering_secret	change this or be hacked	Secret value for signing metering messages
metering_topic	metering	the topic ceilometer uses for metering messages
sample_source	openstack	The source name of emitted samples
control_exchange	ceilometer	AMQP exchange to connect to if using RabbitMQ or Qpid
database_connection	mongodb://localhost:27017/ceilometer	Database connection string
metering_api_port	8777	The port for the ceilometer API server
reseller_prefix	AUTH_	Prefix used by swift for reseller token

Service polling authentication

The following options must be placed under a [service_credentials] section and will be used by Ceilometer to retrieve information from OpenStack components.

Parameter	Default	Note
os_username	ceilometer	Username to use for openstack service access
os_password os_tenant_id	admin	Password to use for openstack service access Tenant ID to use for openstack service access
os_tenant_name	admin	Tenant name to use for openstack service access
os_auth_url	http://localhost:5000/v2.0	Auth URL to use for openstack service access
os_endpoint_type	publicURL	Endpoint type in the catalog to use to access services

Keystone Middleware Authentication

The following table lists the Keystone middleware authentication options which are used to get admin token. Please note that these options need to be under [keystone_authtoken] section.

Parameter	Default	Note
auth_host		The host providing the Keystone service API endpoint for validating and requesting tokens
auth_port	35357	The port used to validate tokens
auth_protocol	https	The protocol used to validate tokens
auth_uri admin_token admin_user admin_password admin_tenant_name signing_dir certfile keyfile	auth_protocol://auth_host:auth_port	The full URI used to validate tokens Either this or the following three options are required. If set, this is a single shared secret with the Keystone configuration used to validate tokens. User name for retrieving admin token Password for retrieving admin token Tenant name for retrieving admin token The cache directory for signing certificate Required if Keystone server requires client cert Required if Keystone server requires client cert. This can be the same as certfile if the certfile includes the private key.

SQL Alchemy

Parameter	Default	Note
sql_connection_debug	0	Verbosity of SQL debugging information. 0=None, 100=Everything
sql_connection_trace	False	Add python stack traces to SQL as comment strings
sql_idle_timeout	3600	timeout before idle sql connections are reaped
sql_max_retries	10	maximum db connection retries during startup. (setting -1 implies an infinite retry count)
sql_retry_interval	10	interval between retries of opening a sql connection
mysql_engine	InnoDB	MySQL engine to use
sqlite_synchronous	True	If passed, use synchronous mode for sqlite

HBase

This storage implementation uses Thrift HBase interface. The default Thrift's connection settings should be changed to support using ConnectionPool in HBase. To ensure proper configuration, please add the following lines to the hbase-site.xml configuration file:

<property>
  <name>hbase.thrift.minWorkerThreads</name>
  <value>200</value>
</property>

For pure development purposes, you can use HBase from Apache or some other vendors like Cloudera or Hortonworks. To verify your installation, you can use the list command in HBase shell, to list the tables in your HBase server, as follows:

$ ${HBASE_HOME}/bin/hbase shell

hbase> list

Note

This driver has been tested against HBase 0.94.2/CDH 4.2.0, HBase 0.94.4/HDP 1.2, HBase 0.94.18/Apache, HBase 0.94.5/Apache, HBase 0.96.2/Apache and HBase 0.98.0/Apache. Versions earlier than 0.92.1 are not supported due to feature incompatibility.

To find out more about supported storage backends please take a look on the install/manual/ guide.

Note

If you are changing the configuration on the fly to use HBase, as a storage backend, you will need to restart the Ceilometer services that use the database to allow the changes to take affect, i.e. the collector and API services.

Event Conversion

The following options in the [event] configuration section affect the extraction of Event data from notifications.

Parameter	Default	Note
drop_unmatched_notifications	False	If set to True, then notifications with no matching event definition will be dropped. (Notifications will only be dropped if this is True)
definitions_cfg_file	event_definitions.yaml	Name of event definitions config file (yaml format)

General options

The following is the list of openstack-common options that we use:

Parameter	Default	Note
default_notification_level	INFO	Default notification level for outgoing notifications
default_publisher_id	$host	Default publisher_id for outgoing notifications
bind_host	0.0.0.0	IP address to listen on
bind_port	9292	Port numver to listen on
port	5672	Rabbit MQ port to liste on
fake_rabbit	False	If passed, use a fake RabbitMQ provider
publish_errors	False	publish error events
use_stderr	True	Log output to standard error
logfile_mode log_dir log_file	0644	Default file mode used when creating log files Log output to a per-service log file in named directory Log output to a named file
log_format	date-time level name msg	Log format
log_date_format log_config	YYYY-MM-DD hh:mm:ss	Log date format Logging configuration file used. The options specified in that config file will override any other logging options specified in Ceilometer config file.
default_log_levels	['amqplib=WARN',sqlalchemy=WARN,...]	Default log level per components
notification_topics	['notifications', ]	AMQP topic used for openstack notifications
enabled_apis	['ec2', 'osapi_compute']	List of APIs to enable by default
verbose	False	Print more verbose output
debug	False	Print debugging output
state_path	currentdir	Top-level directory for maintaining nova state
sqlite_db	nova.sqlite	file name for sqlite
sql_connection	sqlite:///$state_path/$sqlite_db	connection string for sql database
matchmaker_ringfile	/etc/nova/matchmaker_ring.json	Matchmaker ring file (JSON)
rpc_zmq_bind_address	'*'	ZeroMQ bind address
rpc_zmq_matchmaker	ceilometer.openstack.common.rpc. matchmaker.MatchMakerLocalhost	MatchMaker drivers
rpc_zmq_port	9501	ZeroMQ receiver listening port
rpc_zmq_port_pub	9502	ZeroMQ fanout publisher port
rpc_zmq_contexts	1	Number of ZeroMQ contexts
rpc_zmq_ipc_dir	/var/run/openstack	Directory for holding IPC sockets
rabbit_port	5672	The RabbitMQ broker port where a single node is used
rabbit_host	localhost	The RabbitMQ broker address where a single node is used
rabbit_hosts	['$rabbit_host:$rabbit_port']	The list of rabbit hosts to listen to
rabbit_userid	guest	the RabbitMQ userid
rabbit_password	guest	the RabbitMQ password
rabbit_virtual_host	/	the RabbitMQ virtual host
rabbit_retry_interval	1	how frequently to retry connecting with RabbitMQ
rabbit_retry_backoff	2	how long to backoff for between retries when connecting
rabbit_max_retries	0	maximum retries with trying to connect to RabbitMQ (the default of 0 implies an infinite retry count)
rabbit_durable_queues	False	use durable queues in RabbitMQ
rabbit_use_ssl	False	connect over SSL for RabbitMQ
rabbit_durable_queues	False	use durable queues in RabbitMQ
rabbit_ha_queues kombu_ssl_version kombu_ssl_keyfile kombu_ssl_certfile kombu_ssl_ca_certs	False	use H/A queues in RabbitMQ (x-ha-policy: all). SSL version to use (valid only if SSL enabled) SSL key file (valid only if SSL enabled) SSL cert file (valid only if SSL enabled) SSL certification authority file
qpid_hostname	localhost	Qpid broker hostname
qpid_port qpid_username qpid_password qpid_sasl_mechanisms	5672	Qpid broker port Username for qpid connection Password for qpid connection Space separated list of SASL mechanisms to use for auth
qpid_reconnect_timeout	0	Reconnection timeout in seconds
qpid_reconnect_limit	0	Max reconnections before giving up
qpid_reconnect_interval_min	0	Minimum seconds between reconnection attempts
qpid_reconnect_interval_max	0	Maximum seconds between reconnection attempts
qpid_reconnect_interval	0	Equivalent to setting max and min to the same value
qpid_heartbeat	60	Seconds between connection keepalive heartbeats
qpid_protocol	tcp	Transport to use, either 'tcp' or 'ssl'
qpid_reconnect	True	Automatically reconnect
qpid_tcp_nodelay	True	Disable Nagle algorithm
rpc_backend	kombu	The messaging module to use, defaults to kombu.
rpc_thread_pool_size	64	Size of RPC thread pool
rpc_conn_pool_size	30	Size of RPC connection pool
rpc_response_timeout	60	Seconds to wait for a response from call or multicall
rpc_cast_timeout	30	Seconds to wait before a cast expires (TTL). Only supported by impl_zmq.
dispatchers	database	The list of dispatchers to process metering data.

Sample Configuration file

The sample configuration file for Ceilometer, named etc/ceilometer/ceilometer.conf.sample, was removed from version control after the Icehouse release. For more details, please read the file etc/ceilometer/README-ceilometer.conf.txt. You can generate this sample configuration file by running tox -e genconfig.

Note

tox version 1.7.0 and 1.7.1 have a backward compatibility issue with OpenStack projects. If you meet the "tox.ConfigError: ConfigError: substitution key 'posargs' not found" problem, run sudo pip install -U "tox>=1.6.1,!=1.7.0,!=1.7.1" to get a proper version, then try tox -e genconfig again.

Pipelines

Pipelines describe a coupling between sources of samples and the corresponding sinks for transformation and publication of these data.

A source is a producer of samples, in effect a set of pollsters and/or notification handlers emitting samples for a set of matching meters.

Each source configuration encapsulates meter name matching, polling interval determination, optional resource enumeration or discovery, and mapping to one or more sinks for publication.

A sink on the other hand is a consumer of samples, providing logic for the transformation and publication of samples emitted from related sources. Each sink configuration is concerned only with the transformation rules and publication conduits for samples.

In effect, a sink describes a chain of handlers. The chain starts with zero or more transformers and ends with one or more publishers. The first transformer in the chain is passed samples from the corresponding source, takes some action such as deriving rate of change, performing unit conversion, or aggregating, before passing the modified sample to next step.

The chains end with one or more publishers. This component makes it possible to persist the data into storage through the message bus or to send it to one or more external consumers. One chain can contain multiple publishers, see the multi-publisher section.

Pipeline configuration

Pipeline configuration by default, is stored in a separate configuration file, called pipeline.yaml, next to the ceilometer.conf file. The pipeline configuration file can be set in the pipeline_cfg_file parameter in ceilometer.conf. Multiple chains can be defined in one configuration file.

The chain definition looks like the following:

---
sources:
  - name: 'source name'
    interval: 'how often should the samples be injected into the pipeline'
    meters:
      - 'meter filter'
    resources:
      - 'list of resource URLs'
    sinks
      - 'sink name'
sinks:
  - name: 'sink name'
    transformers: 'definition of transformers'
    publishers:
      - 'list of publishers'

The interval parameter in the sources section should be defined in seconds. It determines the cadence of sample injection into the pipeline, where samples are produced under the direct control of an agent, i.e. via a polling cycle as opposed to incoming notifications.

There are several ways to define the list of meters for a pipeline source. The list of valid meters can be found in the measurements section. There is a possibility to define all the meters, or just included or excluded meters, with which a source should operate:

• To include all meters, use the '*' wildcard symbol.
• To define the list of meters, use either of the following:
  • To define the list of included meters, use the 'meter_name' syntax
  • To define the list of excluded meters, use the '!meter_name' syntax
  • For meters, which identify a complex Sample field, use the wildcard symbol to select all, e.g. for "instance:m1.tiny", use "instance:*"

The above definition methods can be used in the following combinations:

• Only the wildcard symbol
• The list of included meters
• The list of excluded meters
• Wildcard symbol with the list of excluded meters

Note

At least one of the above variations should be included in the meters section. Included and excluded meters cannot co-exist in the same pipeline. Wildcard and included meters cannot co-exist in the same pipeline definition section.

The optional resources section of a pipeline source allows a static list of resource URLs to be to be configured. An amalgamated list of all statically configured resources for a set of pipeline sources with a common interval is passed to individual pollsters matching those pipelines.

The transformers section of a pipeline sink provides the possibility to add a list of transformer definitions. The names of the transformers should be the same as the names of the related extensions in setup.cfg.

The definition of transformers can contain the following fields:

transformers:
    - name: 'name of the transformer'
      parameters:

The parameters section can contain transformer specific fields, like source and target fields with different subfields in case of the rate_of_change, which depends on the implementation of the transformer. In case of the transformer, which creates the cpu_util meter, the definition looks like the following:

transformers:
    - name: "rate_of_change"
      parameters:
          target:
              name: "cpu_util"
              unit: "%"
              type: "gauge"
              scale: "100.0 / (10**9 * (resource_metadata.cpu_number or 1))"

The rate_of_change transformer generates the cpu_util meter from the sample values of the cpu counter, which represents cumulative CPU time in nanoseconds. The transformer definition above defines a scale factor (for nanoseconds, multiple CPUs, etc.), which is applied before the transformation derives a sequence of gauge samples with unit '%', from the original values of the cpu meter.

The definition for the disk I/O rate, which is also generated by the rate_of_change transformer:

transformers:
    - name: "rate_of_change"
      parameters:
          source:
              map_from:
                  name: "disk\\.(read|write)\\.(bytes|requests)"
                  unit: "(B|request)"
          target:
              map_to:
                  name: "disk.\\1.\\2.rate"
                  unit: "\\1/s"
              type: "gauge"

The publishers section contains the list of publishers, where the samples data should be sent after the possible transformations. The names of the publishers should be the same as the related names of the plugins in setup.cfg.

The default configuration can be found in pipeline.yaml.