bifrost/troubleshooting.rst

===============
Troubleshooting
===============
***********
Firewalling
***********

Due to the nature of firewall settings and customizations, Bifrost does
**not** change any local firewalling on the node. Users must ensure that
their firewalling for the node running bifrost is such that the nodes that
are being booted can connect to the following ports::

    67/UDP for DHCP requests to be serviced
    69/UDP for TFTP file transfers (Initial iPXE binary)
    6301/TCP for the Ironic API
    8080/TCP for HTTP File Downloads (iPXE, Ironic-Python-Agent)

If you encounter any additional issues, use of tcpdump is highly recommended
while attempting to deploy a single node in order to capture and review the
traffic exchange between the two nodes.

*****************
NodeLocked Errors
*****************

This is due to node status checking thread in Ironic, which is a locking
action as it utilizes IPMI.  The best course of action is to retry the
operation.  If this is occurring with a high frequency, tuning might be
required.

Example error:

|    NodeLocked: Node 00000000-0000-0000-0000-046ebb96ec21 is locked by
     host $HOSTNAME, please retry after the current operation is completed.

*********************************************
Unexpected/Unknown failure with the IPA Agent
*********************************************

New image appears not to be deploying
=====================================

When deploying a new image with the same previous name, it is necessary to
purge the contents of the TFTP master_images folder which caches the image
file for deployments.  The default location for this folder is 
``/tftpboot/master_images``.

Additionally, a playbook has been included that can be used prior to a
re-installation to ensure fresh images are deployed.  This playbook can
be found at playbooks/cleanup-deployment-images.yaml

Building an IPA image
=====================

Troubleshooting issues involving IPA can be time consuming.  The IPA
developers **HIGHLY** recommend that users build their own custom IPA
images in order to inject things such as SSH keys, and turn on agent
debugging which must be done in a custom image as there is no mechanism
to enable debugging via the kernel command line at present.

IPA's instructions on building a custom image can be found at:
http://git.openstack.org/cgit/openstack/ironic-python-agent/tree/imagebuild/coreos/README.rst

This essentially boils down to the following steps:

1. `git clone https://git.openstack.org/openstack/ironic-python-agent`
2. `cd ironic-python-agent`
3. `pip install -r ./requirements.txt`
4. If you don't already have docker installed, execute: 
   `sudo apt-get install docker docker.io`
5. `cd imagebuild/coreos`
6. Edit oem/cloudconfig.yml and add "--debug" to the end of the ExecStart
   setting for the ironic-python-agent.service unit.
7. Execute `make` to complete the build process.

Once your build is completed, you will need to copy the images files written
to the UPLOAD folder, into the /httpboot folder.  If your utilizing the
default file names, executing `cp UPLOAD/* /httpboot/` should achieve this.

Since you have updated the image to be deployed, you will need to purge the
contents of /tftpboot/master_images for the new image to be utilized for the
deployment process.

Obtaining IPA logs via the console
==================================

1) By default, in testing mode Bifrost sets the agent journal to be logged
   to the console, hover testing mode is geared more towards local Virtual
   machine testing.  In order to get the IPA agent to at least detail
   information to the screen, you will want to set the following setting
   in ironic.conf::

    agent_pxe_append_params=nofb nomodeset vga=normal console=ttyS0 systemd.journald.forward_to_console=yes

2) Once set, restart the ironic-conductor service, e.g.
   `service ironic-conductor restart` and attempt to redeploy the node.
   You will want to view the system console occurring. If possible, you
   may wish to use ipmitool and write the output to a log file.

Gaining access via SSH to the node running IPA
==============================================

If you wish to SSH into the node in order to perform any sort of post-mortem,
you will need to do the following:

1) Set an sshkey="ssh-rsa AAAA....." value on the agent_pxe_append_params
   setting in /etc/ironic/ironic.conf

2) You will need to short circuit the ironic conductor process. An ideal
   place to do so is in ``ironic/drivers/modules/agent.py`` in the
   reboot_to_instance method.  Temporarily short circuiting this step
   will force you to edit the MySQL database if you wish to re-deploy
   the node, but the node should stay online after IPA has completed
   deployment.

3) ssh -l core <ip-address-of-node>

********************************
ssh_public_key_path is not valid
********************************

Bifrost requires that the user who executes bifrost have an SSH key in
their user home, or that the user defines a variable to tell bifrost where
to identify this file.  Once this variable is defined to a valid file, the
deployment playbook can be re-run.

Generating a new ssh key
========================

See the manual page for the ssh-keygen command.

Defining a specific public key file
===================================

A user can define a specific public key file by utilizing the
ssh_public_key_path variable.  This can be set in the
group_vars/inventory/all file, or on the ansible-playbook command
line utilizing the -e command line parameter.

Example::

  ansible-playbook -i inventory/bifrost_inventory.py deploy-dynamic.yaml -e ssh_public_key_path=~/path/to/public/key/id_rsa.pub

NOTE: The matching private key will need to be utilized to login to the
machine deployed.