devstack/doc/source/guides/usb-boot.rst
Sean M. Collins 0f3bafc74e Remove copyright footer from RST docs
Change-Id: I2fe6aac7caec21af26983636d6ec827b3525ee15
2014-10-24 10:48:46 -04:00

58 lines
1.4 KiB
ReStructuredText

`DevStack </>`__
- `Overview <../overview.html>`__
- `Changes <../changes.html>`__
- `FAQ <../faq.html>`__
- `git.openstack.org <https://git.openstack.org/cgit/openstack-dev/devstack>`__
- `Gerrit <https://review.openstack.org/#/q/status:open+project:openstack-dev/devstack,n,z>`__
USB Boot: Undoable Stack Boot
=============================
Boot DevStack from a USB disk into a RAM disk.
Prerequisites
-------------
Hardware
~~~~~~~~
This guide covers the creation of a bootable USB drive. Your computer
BIOS must support booting from USB and You will want at least 3GB of
RAM. You also will need a USB drive of at least 2GB.
Software
~~~~~~~~
Ubuntu 11.10 (Oneiric Ocelot) is required on host to create images.
Installation bit blasting
-------------------------
Set Up USB Drive
~~~~~~~~~~~~~~~~
- Insert the USB drive into the computer. Make a note of the device
name, such as ``sdb``. Do not mount the device.
- Install the boot system:
::
tools/build_usb_boot.sh /dev/sdb1
This calls tools/build\_ramdisk.sh to create a 2GB ramdisk containing
a complete development Oneiric OS plus the OpenStack code checkouts.
It then writes a syslinux boot sector to the specified device and
creates ``/syslinux``.
- If desired, you may now mount the device:
::
mount /dev/sdb1 /mnt/tmp
# foo
umount /mnt/tmp
Now `return <ramdisk.html>`__ to the RAM disk Guide to kick off your
DevStack experience.