kolla-ansible/doc/source/user/multi-regions.rst

.. _multi-regions:

======================================
Multiple Regions Deployment with Kolla
======================================

This section describes how to perform a basic multiple region deployment
with Kolla. A basic multiple region deployment consists of separate
OpenStack installations in two or more regions (RegionOne, RegionTwo, ...)
with a shared Keystone and Horizon. The rest of this documentation assumes
Keystone and Horizon are deployed in RegionOne, and other regions have
access to the internal endpoint (for example, ``kolla_internal_fqdn``) of
RegionOne.
It also assumes that the operator knows the name of all OpenStack regions
in advance, and considers as many Kolla deployments as there are regions.

There is specifications of multiple regions deployment at
`Multi Region Support for Heat
<https://wiki.openstack.org/wiki/Heat/Blueprints/Multi_Region_Support_for_Heat>`__.

Deployment of the first region with Keystone and Horizon
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Deployment of the first region results in a typical Kolla deployment
whether it is an *all-in-one* or *multinode* deployment (see
:doc:`quickstart`). It only requires slight modifications in the
``/etc/kolla/globals.yml`` configuration file. First of all, ensure that
Keystone and Horizon are enabled:

.. code-block:: console

   enable_keystone: "yes"
   enable_horizon: "yes"

Then, change the value of ``multiple_regions_names`` to add names of other
regions. In this example, we consider two regions. The current one,
formerly known as RegionOne, that is hidden behind
``openstack_region_name`` variable, and the RegionTwo:

.. code-block:: yaml

   openstack_region_name: "RegionOne"
   multiple_regions_names:
       - "{{ openstack_region_name }}"
       - "RegionTwo"

.. note::

   Kolla uses these variables to create necessary endpoints into
   Keystone so that services of other regions can access it. Kolla
   also updates the Horizon ``local_settings`` to support multiple
   regions.

Finally, note the value of ``kolla_internal_fqdn`` and run
``kolla-ansible``. The ``kolla_internal_fqdn`` value will be used by other
regions to contact Keystone. For the sake of this example, we assume the
value of ``kolla_internal_fqdn`` is ``10.10.10.254``.

Deployment of other regions
~~~~~~~~~~~~~~~~~~~~~~~~~~~

Deployment of other regions follows an usual Kolla deployment except that
OpenStack services connect to the RegionOne's Keystone. This implies to
update the ``/etc/kolla/globals.yml`` configuration file to tell Kolla how
to reach Keystone. In the following, ``kolla_internal_fqdn_r1`` refers to
the value of ``kolla_internal_fqdn`` in RegionOne:

.. code-block:: yaml

   kolla_internal_fqdn_r1: 10.10.10.254

   keystone_internal_url: "{{ internal_protocol }}://{{ kolla_internal_fqdn_r1 }}:{{ keystone_public_port }}"

   openstack_auth:
       auth_url: "{{ keystone_internal_url }}"
       username: "{{ keystone_admin_user }}"
       password: "{{ keystone_admin_password }}"
       user_domain_name: "{{ default_user_domain_name }}"
       system_scope: "all"

.. note::

   If the ``kolla_internal_vip_address`` and/or the
   ``kolla_external_vip_address`` reside on the same subnet as
   ``kolla_internal_fqdn_r1``, you should set the
   ``keepalived_virtual_router_id`` value in the ``/etc/kolla/globals.yml``
   to a unique number.

Configuration files of cinder,nova,neutron,glance... have to be updated to
contact RegionOne's Keystone. Fortunately, Kolla allows you to override all
configuration files at the same time thanks to the
``node_custom_config`` variable (see :ref:`service-config`). To do so,
create a ``global.conf`` file with the following content:

.. code-block:: ini

   [keystone_authtoken]
   www_authenticate_uri = {{ keystone_internal_url }}
   auth_url = {{ keystone_internal_url }}

The Placement API section inside the nova configuration file also has
to be updated to contact RegionOne's Keystone. So create, in the same
directory, a ``nova.conf`` file with below content:

.. code-block:: ini

   [placement]
   auth_url = {{ keystone_internal_url }}

The Heat section inside the configuration file also
has to be updated to contact RegionOne's Keystone. So create, in the same
directory, a ``heat.conf`` file with below content:

.. code-block:: ini

   [trustee]
   www_authenticate_uri = {{ keystone_internal_url }}
   auth_url = {{ keystone_internal_url }}

   [ec2authtoken]
   www_authenticate_uri = {{ keystone_internal_url }}

   [clients_keystone]
   www_authenticate_uri = {{ keystone_internal_url }}

The Ceilometer section inside the configuration file also
has to be updated to contact RegionOne's Keystone. So create, in the same
directory, a ``ceilometer.conf`` file with below content:

.. code-block:: ini

   [service_credentials]
   auth_url = {{ keystone_internal_url }}

And link the directory that contains these files into the
``/etc/kolla/globals.yml``:

.. code-block:: yaml

   node_custom_config: path/to/the/directory/of/global&nova_conf/

Also, change the name of the current region. For instance, RegionTwo:

.. code-block:: yaml

   openstack_region_name: "RegionTwo"

Finally, disable the deployment of Keystone and Horizon that are
unnecessary in this region and run ``kolla-ansible``:

.. code-block:: yaml

   enable_keystone: "no"
   enable_horizon: "no"

The configuration is the same for any other region.