openstack/openstack-ansible
Code Issues Proposed changes
e1015efa33
openstack-ansible/doc/source/developer-docs/configure-cinder.rst
Mitsuhiro SHIGEMATSU 5f06376393 Fix typos in openstack-ansible/doc 
Change-Id: Idf78d4bea46624011ec8fac658672158125fad05
2016-06-19 17:38:23 +09:00

14 KiB
Raw Blame History

Home OpenStack-Ansible Installation Guide

Configuring the Block (cinder) storage service (optional)

By default, the Block (cinder) storage service installs on the host itself using the LVM backend.

Note

While this is the default for cinder, using the LVM backend results in a Single Point of Failure. As a result of the volume service being deployed directly to the host, is_metal is true when using LVM.

NFS backend

Edit /etc/openstack_deploy/openstack_user_config.yml and configure the NFS client on each storage node if the NetApp backend is configured to use an NFS storage protocol.

  1. Add the cinder_backends stanza (which includes cinder_nfs_client) under the container_vars stanza for each storage node:

    container_vars:
  cinder_backends:
    cinder_nfs_client:

  2. Configure the location of the file that lists shares available to the block storage service. This configuration file must include nfs_shares_config:

    nfs_shares_config: SHARE_CONFIG

    Replace SHARE_CONFIG with the location of the share configuration file. For example, /etc/cinder/nfs_shares.

  3. Configure one or more NFS shares:

    shares:
   - { ip: "NFS_HOST", share: "NFS_SHARE" }

    Replace NFS_HOST with the IP address or hostname of the NFS server, and the NFS_SHARE with the absolute path to an existing and accessible NFS share.

Backup

You can configure cinder to backup volumes to Object Storage (swift). Enable the default configuration to back up volumes to a swift installation accessible within your environment. Alternatively, you can set cinder_service_backup_swift_url and other variables to back up to an external swift installation.

  1. Add or edit the following line in the /etc/openstack_deploy/user_variables.yml file and set the value to True:

    cinder_service_backup_program_enabled: True

  2. By default, cinder uses the access credentials of the user initiating the backup. Default values are set in the /opt/openstack-ansible/playbooks/roles/os_cinder/defaults/main.yml file. You can override those defaults by setting variables in /etc/openstack_deploy/user_variables.yml to change how cinder performs backups. Add and edit any of the following variables to the /etc/openstack_deploy/user_variables.yml file:

    ...
cinder_service_backup_swift_auth: per_user
# Options include 'per_user' or 'single_user'. We default to
# 'per_user' so that backups are saved to a user's swift
# account.
cinder_service_backup_swift_url:
# This is your swift storage url when using 'per_user', or keystone
# endpoint when using 'single_user'.  When using 'per_user', you
# can leave this as empty or as None to allow cinder-backup to
# obtain a storage url from environment.
cinder_service_backup_swift_url:
cinder_service_backup_swift_auth_version: 2
cinder_service_backup_swift_user:
cinder_service_backup_swift_tenant:
cinder_service_backup_swift_key:
cinder_service_backup_swift_container: volumebackups
cinder_service_backup_swift_object_size: 52428800
cinder_service_backup_swift_retry_attempts: 3
cinder_service_backup_swift_retry_backoff: 2
cinder_service_backup_compression_algorithm: zlib
cinder_service_backup_metadata_version: 2

During installation of cinder, the backup service is configured.

Using Ceph for cinder backups

You can deploy Ceph to hold cinder volume backups. To get started, set the cinder_service_backup_driver Ansible variable:

cinder_service_backup_driver: cinder.backup.drivers.ceph

Configure the Ceph user and the pool to use for backups. The defaults are shown here:

cinder_service_backup_ceph_user: cinder-backup
cinder_service_backup_ceph_pool: backups

Availability zones

Create multiple availability zones to manage cinder storage hosts. Edit the /etc/openstack_deploy/openstack_user_config.yml and /etc/openstack_deploy/user_variables.yml files to set up availability zones.

  1. For each cinder storage host, configure the availability zone under the container_vars stanza:

    cinder_storage_availability_zone: CINDERAZ

    Replace CINDERAZ with a suitable name. For example cinderAZ_2.

  2. If more than one availability zone is created, configure the default availability zone for all the hosts by creating a cinder_default_availability_zone in your /etc/openstack_deploy/user_variables.yml

    cinder_default_availability_zone: CINDERAZ_DEFAULT

    Replace CINDERAZ_DEFAULT with a suitable name. For example, cinderAZ_1. The default availability zone should be the same for all cinder hosts.

OpenStack Dashboard (horizon) configuration for cinder

You can configure variables to set the behavior for cinder volume management in OpenStack Dashboard (horizon). By default, no horizon configuration is set.

  1. The default destination availability zone is nova if you use multiple availability zones and cinder_default_availability_zone has no definition. Volume creation with horizon might fail if there is no availability zone named nova. Set cinder_default_availability_zone to an appropriate availability zone name so that Any availability zone works in horizon.
  2. horizon does not populate the volume type by default. On the new volume page, a request for the creation of a volume with the default parameters fails. Set cinder_default_volume_type so that a volume creation request without an explicit volume type succeeds.

Configuring cinder to use LVM

  1. List the container_vars that contain the storage options for the target host.

    Note

    The vars related to the cinder availability zone and the limit_container_types are optional.

    To configure an LVM, utilize the following example:

    storage_hosts:
 Infra01:
   ip: 172.29.236.16
   container_vars:
     cinder_storage_availability_zone: cinderAZ_1
     cinder_default_availability_zone: cinderAZ_1
     cinder_backends:
       lvm:
         volume_backend_name: LVM_iSCSI
         volume_driver: cinder.volume.drivers.lvm.LVMVolumeDriver
         volume_group: cinder-volumes
         iscsi_ip_address: "{{ storage_address }}"
       limit_container_types: cinder_volume

To use another backend in a container instead of bare metal, edit the /etc/openstack_deploy/env.d/cinder.yml and remove the is_metal: true stanza under the cinder_volumes_container properties.

Configuring cinder to use Ceph

In order for cinder to use Ceph, it is necessary to configure for both the API and backend. When using any forms of network storage (iSCSI, NFS, Ceph) for cinder, the API containers can be considered as backend servers. A separate storage host is not required.

In env.d/cinder.yml remove is_metal: true

  1. List of target hosts on which to deploy the cinder API. We recommend that a minimum of three target hosts are used for this service.

    storage-infra_hosts:
  infra1:
    ip: 172.29.236.101
  infra2:
    ip: 172.29.236.102
  infra3:
    ip: 172.29.236.103

    To configure an RBD backend, utilize the following example:

    container_vars:
cinder_storage_availability_zone: cinderAZ_3
cinder_default_availability_zone: cinderAZ_1
cinder_backends:
  limit_container_types: cinder_volume
  volumes_hdd:
    volume_driver: cinder.volume.drivers.rbd.RBDDriver
    rbd_pool: volumes_hdd
    rbd_ceph_conf: /etc/ceph/ceph.conf
    rbd_flatten_volume_from_snapshot: 'false'
    rbd_max_clone_depth: 5
    rbd_store_chunk_size: 4
    rados_connect_timeout: -1
    volume_backend_name: volumes_hdd
    rbd_user: "{{ cinder_ceph_client }}"
    rbd_secret_uuid: "{{ cinder_ceph_client_uuid }}"

The following example sets cinder to use the cinder_volumes pool. The example uses cephx authentication and requires existing cinder account for cinder_volumes pool.

In user_variables.yml:

ceph_mons:
  - 172.29.244.151
  - 172.29.244.152
  - 172.29.244.153

In openstack_user_config.yml:

storage_hosts:
 infra1:
  ip: 172.29.236.101
  container_vars:
   cinder_backends:
     limit_container_types: cinder_volume
     rbd:
       volume_group: cinder-volumes
       volume_driver: cinder.volume.drivers.rbd.RBDDriver
       volume_backend_name: rbd
       rbd_pool: cinder-volumes
       rbd_ceph_conf: /etc/ceph/ceph.conf
       rbd_user: cinder
 infra2:
  ip: 172.29.236.102
  container_vars:
   cinder_backends:
     limit_container_types: cinder_volume
     rbd:
       volume_group: cinder-volumes
       volume_driver: cinder.volume.drivers.rbd.RBDDriver
       volume_backend_name: rbd
       rbd_pool: cinder-volumes
       rbd_ceph_conf: /etc/ceph/ceph.conf
       rbd_user: cinder
 infra3:
  ip: 172.29.236.103
  container_vars:
   cinder_backends:
     limit_container_types: cinder_volume
     rbd:
       volume_group: cinder-volumes
       volume_driver: cinder.volume.drivers.rbd.RBDDriver
       volume_backend_name: rbd
       rbd_pool: cinder-volumes
       rbd_ceph_conf: /etc/ceph/ceph.conf
       rbd_user: cinder

This link provides a complete working example of Ceph setup and integration with cinder (nova and glance included):

Configuring cinder to use a NetApp appliance

To use a NetApp storage appliance back end, edit the /etc/openstack_deploy/openstack_user_config.yml file and configure each storage node that will use it.

Note

Ensure that the NAS Team enables httpd.admin.access.

  1. Add the netapp stanza under the cinder_backends stanza for each storage node:

    cinder_backends:
  netapp:

    The options in subsequent steps fit under the netapp stanza.

    The backend name is arbitrary and becomes a volume type within cinder.

  2. Configure the storage family:

    netapp_storage_family: STORAGE_FAMILY

    Replace STORAGE_FAMILY with ontap_7mode for Data ONTAP operating in 7-mode or ontap_cluster for Data ONTAP operating as a cluster.

  3. Configure the storage protocol:

    netapp_storage_protocol: STORAGE_PROTOCOL

    Replace STORAGE_PROTOCOL with iscsi for iSCSI or nfs for NFS.

    For the NFS protocol, specify the location of the configuration file that lists the shares available to cinder:

    nfs_shares_config: SHARE_CONFIG

    Replace SHARE_CONFIG with the location of the share configuration file. For example, /etc/cinder/nfs_shares.

  4. Configure the server:

    netapp_server_hostname: SERVER_HOSTNAME

    Replace SERVER_HOSTNAME with the hostnames for both netapp controllers.

  5. Configure the server API port:

    netapp_server_port: PORT_NUMBER

    Replace PORT_NUMBER with 80 for HTTP or 443 for HTTPS.

  6. Configure the server credentials:

    netapp_login: USER_NAME
netapp_password: PASSWORD

    Replace USER_NAME and PASSWORD with the appropriate values.

  7. Select the NetApp driver:

    volume_driver: cinder.volume.drivers.netapp.common.NetAppDriver

  8. Configure the volume back end name:

    volume_backend_name: BACKEND_NAME

    Replace BACKEND_NAME with a value that provides a hint for the cinder scheduler. For example, NETAPP_iSCSI.

  9. Ensure the openstack_user_config.yml configuration is accurate:

    storage_hosts:
  Infra01:
    ip: 172.29.236.16
    container_vars:
      cinder_backends:
        limit_container_types: cinder_volume
        netapp:
          netapp_storage_family: ontap_7mode
          netapp_storage_protocol: nfs
          netapp_server_hostname: 111.222.333.444
          netapp_server_port: 80
          netapp_login: openstack_cinder
          netapp_password: password
          volume_driver: cinder.volume.drivers.netapp.common.NetAppDriver
          volume_backend_name: NETAPP_NFS

    For netapp_server_hostname, specify the IP address of the Data ONTAP server. Include iSCSI or NFS for the netapp_storage_family depending on the configuration. Add 80 if using HTTP or 443 if using HTTPS for netapp_server_port.

    The cinder-volume.yml playbook will automatically install the nfs-common file across the hosts, transitioning from an LVM to a NetApp back end.