openstack-ansible/doc/source/install-guide-revised-draft/targethosts-networkrefarch.rst
daz 49c5d1daf9 [docs] Add draft install guide directory
Add draft directory but hide the link on the
index.rst so a preview build is available for patch
reviews

Change-Id: I40fdd4e6c0301c05641fc63643b40f409d5361c3
Implements: blueprint osa-install-guide-overhaul
2016-06-09 15:15:55 +10:00

206 lines
6.6 KiB
ReStructuredText
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

`Home <index.html>`_ OpenStack-Ansible Installation Guide
======================
Reference architecture
======================
Overview
~~~~~~~~
This example allows you to use your own parameters for the deployment.
The following is a table of the bridges that are be configured on hosts, if you followed the
previously proposed design.
+-------------+-----------------------+-------------------------------------+
| Bridge name | Best configured on | With a static IP |
+=============+=======================+=====================================+
| br-mgmt | On every node | Always |
+-------------+-----------------------+-------------------------------------+
| | On every storage node | When component is deployed on metal |
+ br-storage +-----------------------+-------------------------------------+
| | On every compute node | Always |
+-------------+-----------------------+-------------------------------------+
| | On every network node | When component is deployed on metal |
+ br-vxlan +-----------------------+-------------------------------------+
| | On every compute node | Always |
+-------------+-----------------------+-------------------------------------+
| | On every network node | Never |
+ br-vlan +-----------------------+-------------------------------------+
| | On every compute node | Never |
+-------------+-----------------------+-------------------------------------+
Modifying the network interfaces file
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After establishing initial host management network connectivity using
the ``bond0`` interface, modify the ``/etc/network/interfaces`` file as
described in the following procedure.
**Procedure 4.1. Modifying the network interfaces file**
#. Physical interfaces:
.. code-block:: yaml
# Physical interface 1
auto eth0
iface eth0 inet manual
bond-master bond0
bond-primary eth0
# Physical interface 2
auto eth1
iface eth1 inet manual
bond-master bond1
bond-primary eth1
# Physical interface 3
auto eth2
iface eth2 inet manual
bond-master bond0
# Physical interface 4
auto eth3
iface eth3 inet manual
bond-master bond1
#. Bonding interfaces:
.. code-block:: yaml
# Bond interface 0 (physical interfaces 1 and 3)
auto bond0
iface bond0 inet static
bond-slaves eth0 eth2
bond-mode active-backup
bond-miimon 100
bond-downdelay 200
bond-updelay 200
address HOST_IP_ADDRESS
netmask HOST_NETMASK
gateway HOST_GATEWAY
dns-nameservers HOST_DNS_SERVERS
# Bond interface 1 (physical interfaces 2 and 4)
auto bond1
iface bond1 inet manual
bond-slaves eth1 eth3
bond-mode active-backup
bond-miimon 100
bond-downdelay 250
bond-updelay 250
If not already complete, replace ``HOST_IP_ADDRESS``,
``HOST_NETMASK``, ``HOST_GATEWAY``, and ``HOST_DNS_SERVERS``
with the appropriate configuration for the host management network.
#. Logical (VLAN) interfaces:
.. code-block:: yaml
# Container management VLAN interface
iface bond0.CONTAINER_MGMT_VLAN_ID inet manual
vlan-raw-device bond0
# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface
iface bond1.TUNNEL_VLAN_ID inet manual
vlan-raw-device bond1
# Storage network VLAN interface (optional)
iface bond0.STORAGE_VLAN_ID inet manual
vlan-raw-device bond0
Replace ``*_VLAN_ID`` with the appropriate configuration for the
environment.
#. Bridge devices:
.. code-block:: yaml
# Container management bridge
auto br-mgmt
iface br-mgmt inet static
bridge_stp off
bridge_waitport 0
bridge_fd 0
# Bridge port references tagged interface
bridge_ports bond0.CONTAINER_MGMT_VLAN_ID
address CONTAINER_MGMT_BRIDGE_IP_ADDRESS
netmask CONTAINER_MGMT_BRIDGE_NETMASK
dns-nameservers CONTAINER_MGMT_BRIDGE_DNS_SERVERS
# OpenStack Networking VXLAN (tunnel/overlay) bridge
auto br-vxlan
iface br-vxlan inet static
bridge_stp off
bridge_waitport 0
bridge_fd 0
# Bridge port references tagged interface
bridge_ports bond1.TUNNEL_VLAN_ID
address TUNNEL_BRIDGE_IP_ADDRESS
netmask TUNNEL_BRIDGE_NETMASK
# OpenStack Networking VLAN bridge
auto br-vlan
iface br-vlan inet manual
bridge_stp off
bridge_waitport 0
bridge_fd 0
# Bridge port references untagged interface
bridge_ports bond1
# Storage bridge (optional)
auto br-storage
iface br-storage inet static
bridge_stp off
bridge_waitport 0
bridge_fd 0
# Bridge port reference tagged interface
bridge_ports bond0.STORAGE_VLAN_ID
address STORAGE_BRIDGE_IP_ADDRESS
netmask STORAGE_BRIDGE_NETMASK
Replace ``*_VLAN_ID``, ``*_BRIDGE_IP_ADDRESS``, and
``*_BRIDGE_NETMASK``, ``*_BRIDGE_DNS_SERVERS`` with the
appropriate configuration for the environment.
Example for 3 controller nodes and 2 compute nodes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- VLANs:
- Host management: Untagged/Native
- Container management: 10
- Tunnels: 30
- Storage: 20
- Networks:
- Host management: 10.240.0.0/22
- Container management: 172.29.236.0/22
- Tunnel: 172.29.240.0/22
- Storage: 172.29.244.0/22
- Addresses for the controller nodes:
- Host management: 10.240.0.11 - 10.240.0.13
- Host management gateway: 10.240.0.1
- DNS servers: 69.20.0.164 69.20.0.196
- Container management: 172.29.236.11 - 172.29.236.13
- Tunnel: no IP (because IP exist in the containers, when the components aren't deployed directly on metal)
- Storage: no IP (because IP exist in the containers, when the components aren't deployed directly on metal)
- Addresses for the compute nodes:
- Host management: 10.240.0.21 - 10.240.0.22
- Host management gateway: 10.240.0.1
- DNS servers: 69.20.0.164 69.20.0.196
- Container management: 172.29.236.21 - 172.29.236.22
- Tunnel: 172.29.240.21 - 172.29.240.22
- Storage: 172.29.244.21 - 172.29.244.22
--------------
.. include:: navigation.txt