bb99fab148
All other tenant networking scenarios are extended with new parameters: jitter and packet loss. Change-Id: I3ee35671f4474187daf7ff345e81f9e22fb05024
14 KiB
OpenStack Tenant Networking Test Plan
- status
-
draft
- version
-
1.0
- Abstract
This document describes test plan for measuring performance of tenant networking of the OpenStack cloud.
- Conventions
- Topology is how instances are plugged into tenant network
- L2 topology is tenant network topology when instances located in the same L2 domain
- L3 east-west topology is tenant network topology when instances located in different L2 domains connected to the same Neutron router
- L3 north-south topology is tenant network topology when instances located in different L2 domains connected to different Neutron routers, thus the traffic goes outside of the cloud and back
Test Plan
This test plan covers base topologies (L2, L3 east-west and L3 north-south) and collection of common network parameters like bandwidth and latency.
Test Environment
Preparation
This test plan is performed against existing OpenStack cloud.
Environment description
The environment description includes hardware specification of servers, network parameters, operation system and OpenStack deployment characteristics.
Hardware
This section contains list of all types of hardware nodes.
| Parameter | Value | Comments |
| model | e.g. Supermicro X9SRD-F | |
| CPU | e.g. 6 x Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz | |
| role | e.g. compute or network |
Network
This section contains list of interfaces and network parameters. For complicated cases this section may include topology diagram and switch parameters.
| Parameter | Value | Comments |
| network role | e.g. provider or public | |
| card model | e.g. Intel | |
| driver | e.g. ixgbe | |
| speed | e.g. 10G or 1G | |
| MTU | e.g. 9000 | |
| offloading modes | e.g. default |
Software
This section describes installed software.
| Parameter | Value | Comments |
| OS | e.g. Ubuntu 14.04.3 | |
| OpenStack | e.g. Liberty | |
| Hypervisor | e.g. KVM | |
| Neutron plugin | e.g. ML2 + OVS | |
| L2 segmentation | e.g. VLAN or VxLAN or GRE | |
| virtual routers | e.g. legacy or HA or DVR |
Test Case 1: L2 instance-to-instance performance
Description
This test case is executed on a single pair of instances launched on different compute nodes and plugged into the same tenant network. The measurement is done during 60 seconds, average values are calculated.
List of performance metrics
| Priority | Value | Measurement Units | Description |
|---|---|---|---|
| 1 | Latency | ms | The network latency |
| 1 | TCP bandwidth | Mbits/s | TCP network bandwidth |
| 1 | UDP bandwidth | packets per sec | Number of UDP packets with 32 bytes payload |
| 2 | UDP delay jitter | ms | Packet delay variation |
| 2 | UDP packet loss | % | Percentage of lost UDP packets |
| 2 | TCP retransmits | packets per sec | Number of retransmitted TCP packets |
Test Case 2: L2 concurrent performance
Description
This test case is executed on pairs of instances. Every instance is deployed on a different compute nodes (one instance per node). All instances are plugged into the same tenant network. The measurement is run simultaneously on different number of instances, starting with one pair and increasing in geometric progression until all pairs are involved. On every iteration the measurement is run during 60 seconds, then average numbers are stored.
List of performance metrics
Test case result is series of following measurements done at different levels of concurrency. The output may be shown in table form and/or as chart showing dependency of parameters from concurrency.
| Priority | Value | Measurement Units | Description |
|---|---|---|---|
| 1 | Latency | ms | The network latency |
| 1 | TCP bandwidth | Mbits/s | TCP network bandwidth |
| 1 | UDP bandwidth | packets per sec | Number of UDP packets with 32 bytes payload |
| 2 | UDP delay jitter | ms | Packet delay variation |
| 2 | UDP packet loss | % | Percentage of lost UDP packets |
| 2 | TCP retransmits | packets per sec | Number of retransmitted TCP packets |
Test Case 3: L3 east-west instance-to-instance performance
Description
This test case is executed on a single pair of instances launched on different compute nodes and plugged into different tenant networks. Networks are connected by a single router. The measurement is done during 60 seconds, average values are calculated.
List of performance metrics
| Priority | Value | Measurement Units | Description |
|---|---|---|---|
| 1 | Latency | ms | The network latency |
| 1 | TCP bandwidth | Mbits/s | TCP network bandwidth |
| 1 | UDP bandwidth | packets per sec | Number of UDP packets with 32 bytes payload |
| 2 | UDP delay jitter | ms | Packet delay variation |
| 2 | UDP packet loss | % | Percentage of lost UDP packets |
| 2 | TCP retransmits | packets per sec | Number of retransmitted TCP packets |
Test Case 4: L3 east-west concurrent performance
Description
This test case is executed on pairs of instances. Every instance is deployed on a different compute nodes (one instance per node). All instances are grouped by pairs, one member is plugged in tenant network A, the other into tenant network B. Networks A and B are plugged into a single router. The measurement is run simultaneously on different number of instances, starting with one pair and increasing in geometric progression until all pairs are involved. On every iteration the measurement is run during 60 seconds, then average numbers are stored.
List of performance metrics
Test case result is series of following measurements done at different levels of concurrency. The output may be shown in table form and/or as chart showing dependency of parameters from concurrency.
| Priority | Value | Measurement Units | Description |
|---|---|---|---|
| 1 | Latency | ms | The network latency |
| 1 | TCP bandwidth | Mbits/s | TCP network bandwidth |
| 1 | UDP bandwidth | packets per sec | Number of UDP packets with 32 bytes payload |
| 2 | UDP delay jitter | ms | Packet delay variation |
| 2 | UDP packet loss | % | Percentage of lost UDP packets |
| 2 | TCP retransmits | packets per sec | Number of retransmitted TCP packets |
Test Case 5: L3 north-south instance-to-instance performance
Description
This test case is executed on a single pair of instances launched on different compute nodes and plugged into different tenant networks. Each networks is connected to own router, thus traffic goes via external network. The destination instance is reached by floating IP. The measurement is done during 60 seconds, average values are calculated.
List of performance metrics
| Priority | Value | Measurement Units | Description |
|---|---|---|---|
| 1 | Latency | ms | The network latency |
| 1 | TCP bandwidth | Mbits/s | TCP network bandwidth |
| 1 | UDP bandwidth | packets per sec | Number of UDP packets with 32 bytes payload |
| 2 | UDP delay jitter | ms | Packet delay variation |
| 2 | UDP packet loss | % | Percentage of lost UDP packets |
| 2 | TCP retransmits | packets per sec | Number of retransmitted TCP packets |
Test Case 6: L3 north-south concurrent performance
Description
This test case is executed on pairs of instances. Every instance is deployed on a different compute nodes (one instance per node). All instances are grouped by pairs, one member is plugged into tenant network A, the other into tenant network B. Networks A and B are plugged into different routers. Instances from network B are reached via floating IP. The measurement is run simultaneously on different number of instances, starting with one pair and increasing in geometric progression until all pairs are involved. On every iteration the measurement is run during 60 seconds, then average numbers are stored.
List of performance metrics
Test case result is series of following measurements done at different levels of concurrency. The output may be shown in table form and/or as chart showing dependency of parameters from concurrency.
| Priority | Value | Measurement Units | Description |
|---|---|---|---|
| 1 | Latency | ms | The network latency |
| 1 | TCP bandwidth | Mbits/s | TCP network bandwidth |
| 1 | UDP bandwidth | packets per sec | Number of UDP packets with 32 bytes payload |
| 2 | UDP delay jitter | ms | Packet delay variation |
| 2 | UDP packet loss | % | Percentage of lost UDP packets |
| 2 | TCP retransmits | packets per sec | Number of retransmitted TCP packets |
Test Case 7: Neutron QoS testing
Description
This test case is used to verify Neutron QoS feature as scale. The feature allows to limit the traffic bandwidth in a particular network. To simplify testing instances are deployed in the same network (L2 domain). The target bandwidth is specified in kBits/s.
Note
In order to work Neutron QoS extension must be installed and properly configured.
List of performance metrics
| Priority | Value | Measurement Units | Description |
|---|---|---|---|
| 1 | Latency | ms | The network latency |
| 1 | TCP bandwidth | Mbits/s | TCP network bandwidth |
| 1 | UDP bandwidth | packets per sec | Number of UDP packets with 32 bytes payload |
| 2 | UDP delay jitter | ms | Packet delay variation |
| 2 | UDP packet loss | % | Percentage of lost UDP packets |
| 2 | TCP retransmits | packets per sec | Number of retransmitted TCP packets |
It's expected that achieved TCP bandwidth is not higher that the one set in Neutron QoS policy.
Tools
This section contains tools that can be used to perform the test plan.