swift/doc/source/deployment_guide.rst

Deployment Guide

Hardware Considerations

Swift is designed to run on commodity hardware. At Rackspace, our storage servers are currently running fairly generic 4U servers with 24 2T SATA drives and 8 cores of processing power. RAID on the storage drives is not required and not recommended. Swift's disk usage pattern is the worst case possible for RAID, and performance degrades very quickly using RAID 5 or 6.

Deployment Options

The Swift services run completely autonomously, which provides for a lot of flexibility when architecting the hardware deployment for Swift. The 4 main services are:

1. Proxy Services
2. Object Services
3. Container Services
4. Account Services

The Proxy Services are more CPU and network I/O intensive. If you are using 10g networking to the proxy, or are terminating SSL traffic at the proxy, greater CPU power will be required.

The Object, Container, and Account Services (Storage Services) are more disk and network I/O intensive.

The easiest deployment is to install all services on each server. There is nothing wrong with doing this, as it scales each service out horizontally.

At Rackspace, we put the Proxy Services on their own servers and all of the Storage Services on the same server. This allows us to send 10g networking to the proxy and 1g to the storage servers, and keep load balancing to the proxies more manageable. Storage Services scale out horizontally as storage servers are added, and we can scale overall API throughput by adding more Proxies.

If you need more throughput to either Account or Container Services, they may each be deployed to their own servers. For example you might use faster (but more expensive) SAS or even SSD drives to get faster disk I/O to the databases.

A high-availability (HA) deployment of Swift requires that multiple proxy servers are deployed and requests are load-balanced between them. Each proxy server instance is stateless and able to respond to requests for the entire cluster.

Load balancing and network design is left as an exercise to the reader, but this is a very important part of the cluster, so time should be spent designing the network for a Swift cluster.

Web Front End Options

Swift comes with an integral web front end. However, it can also be deployed as a request processor of an Apache2 using mod_wsgi as described in Apache Deployment Guide <apache_deployment_guide>.

Preparing the Ring

The first step is to determine the number of partitions that will be in the ring. We recommend that there be a minimum of 100 partitions per drive to insure even distribution across the drives. A good starting point might be to figure out the maximum number of drives the cluster will contain, and then multiply by 100, and then round up to the nearest power of two.

For example, imagine we are building a cluster that will have no more than 5,000 drives. That would mean that we would have a total number of 500,000 partitions, which is pretty close to 2^19, rounded up.

It is also a good idea to keep the number of partitions small (relatively). The more partitions there are, the more work that has to be done by the replicators and other backend jobs and the more memory the rings consume in process. The goal is to find a good balance between small rings and maximum cluster size.

The next step is to determine the number of replicas to store of the data. Currently it is recommended to use 3 (as this is the only value that has been tested). The higher the number, the more storage that is used but the less likely you are to lose data.

It is also important to determine how many zones the cluster should have. It is recommended to start with a minimum of 5 zones. You can start with fewer, but our testing has shown that having at least five zones is optimal when failures occur. We also recommend trying to configure the zones at as high a level as possible to create as much isolation as possible. Some example things to take into consideration can include physical location, power availability, and network connectivity. For example, in a small cluster you might decide to split the zones up by cabinet, with each cabinet having its own power and network connectivity. The zone concept is very abstract, so feel free to use it in whatever way best isolates your data from failure. Each zone exists in a region.

A region is also an abstract concept that may be used to distinguish between geographically separated areas as well as can be used within same datacenter. Regions and zones are referenced by a positive integer.

You can now start building the ring with:

swift-ring-builder <builder_file> create <part_power> <replicas> <min_part_hours>

This will start the ring build process creating the <builder_file> with 2^<part_power> partitions. <min_part_hours> is the time in hours before a specific partition can be moved in succession (24 is a good value for this).

Devices can be added to the ring with:

swift-ring-builder <builder_file> add r<region>z<zone>-<ip>:<port>/<device_name>_<meta> <weight>

This will add a device to the ring where <builder_file> is the name of the builder file that was created previously, <region> is the number of the region the zone is in, <zone> is the number of the zone this device is in, <ip> is the ip address of the server the device is in, <port> is the port number that the server is running on, <device_name> is the name of the device on the server (for example: sdb1), <meta> is a string of metadata for the device (optional), and <weight> is a float weight that determines how many partitions are put on the device relative to the rest of the devices in the cluster (a good starting point is 100.0 x TB on the drive).Add each device that will be initially in the cluster.

Once all of the devices are added to the ring, run:

swift-ring-builder <builder_file> rebalance

This will distribute the partitions across the drives in the ring. It is important whenever making changes to the ring to make all the changes required before running rebalance. This will ensure that the ring stays as balanced as possible, and as few partitions are moved as possible.

The above process should be done to make a ring for each storage service (Account, Container and Object). The builder files will be needed in future changes to the ring, so it is very important that these be kept and backed up. The resulting .tar.gz ring file should be pushed to all of the servers in the cluster. For more information about building rings, running swift-ring-builder with no options will display help text with available commands and options. More information on how the ring works internally can be found in the Ring Overview <overview_ring>.

Running object-servers Per Disk

The lack of true asynchronous file I/O on Linux leaves the object-server workers vulnerable to misbehaving disks. Because any object-server worker can service a request for any disk, and a slow I/O request blocks the eventlet hub, a single slow disk can impair an entire storage node. This also prevents object servers from fully utilizing all their disks during heavy load.

Another way to get full I/O isolation is to give each disk on a storage node a different port in the storage policy rings. Then set the servers_per_port <object-server-default-options> option in the object-server config. NOTE: while the purpose of this config setting is to run one or more object-server worker processes per disk, the implementation just runs object-servers per unique port of local devices in the rings. The deployer must combine this option with appropriately-configured rings to benefit from this feature.

Here's an example (abbreviated) old-style ring (2 node cluster with 2 disks each):

Devices:    id  region  zone      ip address  port  replication ip  replication port      name
             0       1     1       1.1.0.1    6200       1.1.0.1                6200      d1
             1       1     1       1.1.0.1    6200       1.1.0.1                6200      d2
             2       1     2       1.1.0.2    6200       1.1.0.2                6200      d3
             3       1     2       1.1.0.2    6200       1.1.0.2                6200      d4

And here's the same ring set up for `servers_per_port`:

Devices:    id  region  zone      ip address  port  replication ip  replication port      name
             0       1     1       1.1.0.1    6200       1.1.0.1                6200      d1
             1       1     1       1.1.0.1    6201       1.1.0.1                6201      d2
             2       1     2       1.1.0.2    6200       1.1.0.2                6200      d3
             3       1     2       1.1.0.2    6201       1.1.0.2                6201      d4

When migrating from normal to servers_per_port, perform these steps in order:

1. Upgrade Swift code to a version capable of doing servers_per_port.
2. Enable servers_per_port with a > 0 value
3. Restart swift-object-server processes with a SIGHUP. At this point, you will have the servers_per_port number of swift-object-server processes serving all requests for all disks on each node. This preserves availability, but you should perform the next step as quickly as possible.
4. Push out new rings that actually have different ports per disk on each server. One of the ports in the new ring should be the same as the port used in the old ring ("6200" in the example above). This will cover existing proxy-server processes who haven't loaded the new ring yet. They can still talk to any storage node regardless of whether or not that storage node has loaded the ring and started object-server processes on the new ports.

If you do not run a separate object-server for replication, then this setting must be available to the object-replicator and object-reconstructor (i.e. appear in the [DEFAULT] config section).

General Service Configuration

Most Swift services fall into two categories. Swift's wsgi servers and background daemons.

For more information specific to the configuration of Swift's wsgi servers with paste deploy see general-server-configuration.

Configuration for servers and daemons can be expressed together in the same file for each type of server, or separately. If a required section for the service trying to start is missing there will be an error. The sections not used by the service are ignored.

Consider the example of an object storage node. By convention, configuration for the object-server, object-updater, object-replicator, object-auditor, and object-reconstructor exist in a single file /etc/swift/object-server.conf:

[DEFAULT]
reclaim_age = 604800

[pipeline:main]
pipeline = object-server

[app:object-server]
use = egg:swift#object

[object-replicator]

[object-updater]

[object-auditor]

Swift services expect a configuration path as the first argument:

$ swift-object-auditor
Usage: swift-object-auditor CONFIG [options]

Error: missing config path argument

If you omit the object-auditor section this file could not be used as the configuration path when starting the swift-object-auditor daemon:

$ swift-object-auditor /etc/swift/object-server.conf
Unable to find object-auditor config section in /etc/swift/object-server.conf

If the configuration path is a directory instead of a file all of the files in the directory with the file extension ".conf" will be combined to generate the configuration object which is delivered to the Swift service. This is referred to generally as "directory based configuration".

Directory based configuration leverages ConfigParser's native multi-file support. Files ending in ".conf" in the given directory are parsed in lexicographical order. Filenames starting with '.' are ignored. A mixture of file and directory configuration paths is not supported - if the configuration path is a file only that file will be parsed.

The Swift service management tool swift-init has adopted the convention of looking for /etc/swift/{type}-server.conf.d/ if the file /etc/swift/{type}-server.conf file does not exist.

When using directory based configuration, if the same option under the same section appears more than once in different files, the last value parsed is said to override previous occurrences. You can ensure proper override precedence by prefixing the files in the configuration directory with numerical values.:

/etc/swift/
    default.base
    object-server.conf.d/
        000_default.conf -> ../default.base
        001_default-override.conf
        010_server.conf
        020_replicator.conf
        030_updater.conf
        040_auditor.conf

You can inspect the resulting combined configuration object using the swift-config command line tool

General Server Configuration

Swift uses paste.deploy (http://pythonpaste.org/deploy/) to manage server configurations.

Default configuration options are set in the [DEFAULT] section, and any options specified there can be overridden in any of the other sections BUT ONLY BY USING THE SYNTAX set option_name = value. This is the unfortunate way paste.deploy works and I'll try to explain it in full.

First, here's an example paste.deploy configuration file:

[DEFAULT]
name1 = globalvalue
name2 = globalvalue
name3 = globalvalue
set name4 = globalvalue

[pipeline:main]
pipeline = myapp

[app:myapp]
use = egg:mypkg#myapp
name2 = localvalue
set name3 = localvalue
set name5 = localvalue
name6 = localvalue

The resulting configuration that myapp receives is:

global {'__file__': '/etc/mypkg/wsgi.conf', 'here': '/etc/mypkg',
        'name1': 'globalvalue',
        'name2': 'globalvalue',
        'name3': 'localvalue',
        'name4': 'globalvalue',
        'name5': 'localvalue',
        'set name4': 'globalvalue'}
local {'name6': 'localvalue'}

So, name1 got the global value which is fine since it's only in the DEFAULT section anyway.

name2 got the global value from DEFAULT even though it appears to be overridden in the app:myapp subsection. This is just the unfortunate way paste.deploy works (at least at the time of this writing.)

name3 got the local value from the app:myapp subsection because it is using the special paste.deploy syntax of set option_name = value. So, if you want a default value for most app/filters but want to override it in one subsection, this is how you do it.

name4 got the global value from DEFAULT since it's only in that section anyway. But, since we used the set syntax in the DEFAULT section even though we shouldn't, notice we also got a set name4 variable. Weird, but probably not harmful.

name5 got the local value from the app:myapp subsection since it's only there anyway, but notice that it is in the global configuration and not the local configuration. This is because we used the set syntax to set the value. Again, weird, but not harmful since Swift just treats the two sets of configuration values as one set anyway.

name6 got the local value from app:myapp subsection since it's only there, and since we didn't use the set syntax, it's only in the local configuration and not the global one. Though, as indicated above, there is no special distinction with Swift.

That's quite an explanation for something that should be so much simpler, but it might be important to know how paste.deploy interprets configuration files. The main rule to remember when working with Swift configuration files is:

Note

Use the set option_name = value syntax in subsections if the option is also set in the [DEFAULT] section. Don't get in the habit of always using the set syntax or you'll probably mess up your non-paste.deploy configuration files.

Common configuration

An example of common configuration file can be found at etc/swift.conf-sample

The following configuration options are available:

Option	Default	Description
max_header_size	8192	max_header_size is the max number of bytes in the utf8 encoding of each header. Using 8192 as default because eventlet use 8192 as max size of header line. This value may need to be increased when using identity v3 API tokens including more than 7 catalog entries. See also include_service_catalog in proxy-server.conf-sample (documented in overview_auth.rst).
extra_header_count	0	By default the maximum number of allowed headers depends on the number of max allowed metadata settings plus a default value of 32 for regular http headers. If for some reason this is not enough (custom middleware for example) it can be increased with the extra_header_count constraint.

Object Server Configuration

An Example Object Server configuration can be found at etc/object-server.conf-sample in the source code repository.

The following configuration sections are available:

• [DEFAULT] <object-server-default-options>
• [object-server]
• [object-replicator]
• [object-reconstructor]
• [object-updater]
• [object-auditor]

[DEFAULT]

Option	Default	Description
swift_dir	/etc/swift	Swift configuration directory
devices	/srv/node	Parent directory of where devices are mounted
mount_check	true	Whether or not check if the devices are mounted to prevent accidentally writing to the root device
bind_ip	0.0.0.0	IP Address for server to bind to
bind_port	6200	Port for server to bind to
bind_timeout	30	Seconds to attempt bind before giving up
backlog	4096	Maximum number of allowed pending connections
workers	auto	Override the number of pre-forked workers that will accept connections. If set it should be an integer, zero means no fork. If unset, it will try to default to the number of effective cpu cores and fallback to one. Increasing the number of workers helps slow filesystem operations in one request from negatively impacting other requests, but only the servers_per_port <server-per-port-configuration> option provides complete I/O isolation with no measurable overhead.
servers_per_port	0	If each disk in each storage policy ring has unique port numbers for its "ip" value, you can use this setting to have each object-server worker only service requests for the single disk matching the port in the ring. The value of this setting determines how many worker processes run for each port (disk) in the ring. If you have 24 disks per server, and this setting is 4, then each storage node will have 1 + (24 * 4) = 97 total object-server processes running. This gives complete I/O isolation, drastically reducing the impact of slow disks on storage node performance. The object-replicator and object-reconstructor need to see this setting too, so it must be in the [DEFAULT] section. See server-per-port-configuration.
max_clients	1024	Maximum number of clients one worker can process simultaneously (it will actually accept(2) N + 1). Setting this to one (1) will only handle one request at a time, without accepting another request concurrently.
disable_fallocate	false	Disable "fast fail" fallocate checks if the underlying filesystem does not support it.
log_name	swift	Label used when logging
log_facility	LOG_LOCAL0	Syslog log facility
log_level	INFO	Logging level
log_address	/dev/log	Logging directory
log_max_line_length	0	Caps the length of log lines to the value given; no limit if set to 0, the default.
log_custom_handlers log_udp_host	None	Comma-separated list of functions to call to setup custom log handlers. Override log_address
log_udp_port	514	UDP log port
log_statsd_host log_statsd_port log_statsd_default_sample_rate log_statsd_sample_rate_factor log_statsd_metric_prefix	None 8125 1.0 1.0	Enables StatsD logging; IPv4/IPv6 address or a hostname. If a hostname resolves to an IPv4 and IPv6 address, the IPv4 address will be used.
eventlet_debug	false	If true, turn on debug logging for eventlet
fallocate_reserve	1%	You can set fallocate_reserve to the number of bytes or percentage of disk space you'd like fallocate to reserve, whether there is space for the given file size or not. Percentage will be used if the value ends with a '%'. This is useful for systems that behave badly when they completely run out of space; you can make the services pretend they're out of space early.
conn_timeout	0.5	Time to wait while attempting to connect to another backend node.
node_timeout	3	Time to wait while sending each chunk of data to another backend node.
client_timeout	60	Time to wait while receiving each chunk of data from a client or another backend node
network_chunk_size	65536	Size of chunks to read/write over the network
disk_chunk_size	65536	Size of chunks to read/write to disk
container_update_timeout	1	Time to wait while sending a container update on object update.
reclaim_age	604800	Time elapsed in seconds before the tombstone file representing a deleted object can be reclaimed. This is the maximum window for your consistency engine. If a node that was disconnected from the cluster because of a fault is reintroduced into the cluster after this window without having its data purged it will result in dark data. This setting should be consistent across all object services.
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

[object-server]

Option	Default	Description
use		paste.deploy entry point for the object server. For most cases, this should be egg:swift#object.
set log_name	object-server	Label used when logging
set log_facility	LOG_LOCAL0	Syslog log facility
set log_level	INFO	Logging level
set log_requests	True	Whether or not to log each request
set log_address	/dev/log	Logging directory
user	swift	User to run as
max_upload_time	86400	Maximum time allowed to upload an object
slow	0	If > 0, Minimum time in seconds for a PUT or DELETE request to complete. This is only useful to simulate slow devices during testing and development.
mb_per_sync	512	On PUT requests, sync file every n MB
keep_cache_size	5242880	Largest object size to keep in buffer cache
keep_cache_private	false	Allow non-public objects to stay in kernel's buffer cache
allowed_headers	Content-Disposition, Content-Encoding, X-Delete-At, X-Object-Manifest, X-Static-Large-Object	Comma separated list of headers that can be set in metadata on an object. This list is in addition to X-Object-Meta-* headers and cannot include Content-Type, etag, Content-Length, or deleted
auto_create_account_prefix replication_server	.	Prefix used when automatically creating accounts. Configure parameter for creating specific server. To handle all verbs, including replication verbs, do not specify "replication_server" (this is the default). To only handle replication, set to a True value (e.g. "True" or "1"). To handle only non-replication verbs, set to "False". Unless you have a separate replication network, you should not specify any value for "replication_server".
replication_concurrency	4	Set to restrict the number of concurrent incoming SSYNC requests; set to 0 for unlimited
replication_concurrency_per_device	1	Set to restrict the number of concurrent incoming SSYNC requests per device; set to 0 for unlimited requests per devices. This can help control I/O to each device. This does not override replication_concurrency described above, so you may need to adjust both parameters depending on your hardware or network capacity.
replication_lock_timeout	15	Number of seconds to wait for an existing replication device lock before giving up.
replication_failure_threshold	100	The number of subrequest failures before the replication_failure_ratio is checked
replication_failure_ratio	1.0	If the value of failures / successes of SSYNC subrequests exceeds this ratio, the overall SSYNC request will be aborted
splice	no	Use splice() for zero-copy object GETs. This requires Linux kernel version 3.0 or greater. If you set "splice = yes" but the kernel does not support it, error messages will appear in the object server logs at startup, but your object servers should continue to function.
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.
eventlet_tpool_num_threads	auto	The number of threads in eventlet's thread pool. Most IO will occur in the object server's main thread, but certain "heavy" IO operations will occur in separate IO threads, managed by eventlet. The default value is auto, whose actual value is dependent on the servers_per_port value. If servers_per_port is zero then it uses eventlet's default (currently 20 threads). If the servers_per_port is nonzero then it'll only use 1 thread per process. This value can be overridden with an integer value.

[object-replicator]

Option	Default	Description
log_name	object-replicator	Label used when logging
log_facility	LOG_LOCAL0	Syslog log facility
log_level	INFO	Logging level
log_address	/dev/log	Logging directory
daemonize	yes	Whether or not to run replication as a daemon
interval	30	Time in seconds to wait between replication passes
concurrency	1	Number of replication workers to spawn
sync_method	rsync	The sync method to use; default is rsync but you can use ssync to try the EXPERIMENTAL all-swift-code-no-rsync-callouts method. Once ssync is verified as or better than, rsync, we plan to deprecate rsync so we can move on with more features for replication.
rsync_timeout	900	Max duration of a partition rsync
rsync_bwlimit	0	Bandwidth limit for rsync in kB/s. 0 means unlimited.
rsync_io_timeout	30	Timeout value sent to rsync --timeout and --contimeout options
rsync_compress	no	Allow rsync to compress data which is transmitted to destination node during sync. However, this is applicable only when destination node is in a different region than the local one. NOTE: Objects that are already compressed (for example: .tar.gz, .mp3) might slow down the syncing process.
stats_interval	300	Interval in seconds between logging replication statistics
handoffs_first	false	If set to True, partitions that are not supposed to be on the node will be replicated first. The default setting should not be changed, except for extreme situations.
handoff_delete	auto	By default handoff partitions will be removed when it has successfully replicated to all the canonical nodes. If set to an integer n, it will remove the partition if it is successfully replicated to n nodes. The default setting should not be changed, except for extreme situations.
node_timeout	DEFAULT or 10	Request timeout to external services. This uses what's set here, or what's set in the DEFAULT section, or 10 (though other sections use 3 as the final default).
http_timeout	60	Max duration of an http request. This is for REPLICATE finalization calls and so should be longer than node_timeout.
lockup_timeout	1800	Attempts to kill all workers if nothing replicates for lockup_timeout seconds
rsync_module	{replication_ip}::object	Format of the rsync module where the replicator will send data. The configuration value can include some variables that will be extracted from the ring. Variables must follow the format {NAME} where NAME is one of: ip, port, replication_ip, replication_port, region, zone, device, meta. See etc/rsyncd.conf-sample for some examples.
rsync_error_log_line_length	0	Limits how long rsync error log lines are
ring_check_interval	15	Interval for checking new ring file
recon_cache_path	/var/cache/swift	Path to recon cache
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

[object-reconstructor]

Option	Default	Description
log_name	object-reconstructor	Label used when logging
log_facility	LOG_LOCAL0	Syslog log facility
log_level	INFO	Logging level
log_address	/dev/log	Logging directory
daemonize	yes	Whether or not to run reconstruction as a daemon
interval	30	Time in seconds to wait between reconstruction passes
reconstructor_workers	0	Maximum number of worker processes to spawn. Each worker will handle a subset of devices. Devices will be assigned evenly among the workers so that workers cycle at similar intervals (which can lead to fewer workers than requested). You can not have more workers than devices. If you have no devices only a single worker is spawned.
concurrency	1	Number of reconstruction threads to spawn per reconstructor process.
stats_interval	300	Interval in seconds between logging reconstruction statistics
handoffs_only	false	The handoffs_only mode option is for special case emergency situations during rebalance such as disk full in the cluster. This option SHOULD NOT BE CHANGED, except for extreme situations. When handoffs_only mode is enabled the reconstructor will only revert fragments from handoff nodes to primary nodes and will not sync primary nodes with neighboring primary nodes. This will force the reconstructor to sync and delete handoffs' fragments more quickly and minimize the time of the rebalance by limiting the number of rebuilds. The handoffs_only option is only for temporary use and should be disabled as soon as the emergency situation has been resolved.
node_timeout	DEFAULT or 10	Request timeout to external services. The value used is the value set in this section, or the value set in the DEFAULT section, or 10.
http_timeout	60	Max duration of an http request. This is for REPLICATE finalization calls and so should be longer than node_timeout.
lockup_timeout	1800	Attempts to kill all threads if no fragment has been reconstructed for lockup_timeout seconds.
ring_check_interval	15	Interval for checking new ring file
recon_cache_path	/var/cache/swift	Path to recon cache
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

[object-updater]

Option	Default	Description
log_name	object-updater	Label used when logging
log_facility	LOG_LOCAL0	Syslog log facility
log_level	INFO	Logging level
log_address	/dev/log	Logging directory
interval	300	Minimum time for a pass to take
concurrency	1	Number of updater workers to spawn
node_timeout	DEFAULT or 10	Request timeout to external services. This uses what's set here, or what's set in the DEFAULT section, or 10 (though other sections use 3 as the final default).
objects_per_second	50	Maximum objects updated per second. Should be tuned according to individual system specs. 0 is unlimited.
slowdown	0.01	Time in seconds to wait between objects. Deprecated in favor of objects_per_second.
report_interval	300	Interval in seconds between logging statistics about the current update pass.
recon_cache_path	/var/cache/swift	Path to recon cache
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

[object-auditor]

Option	Default	Description
log_name	object-auditor	Label used when logging
log_facility	LOG_LOCAL0	Syslog log facility
log_level	INFO	Logging level
log_address	/dev/log	Logging directory
log_time	3600	Frequency of status logs in seconds.
interval	30	Time in seconds to wait between auditor passes
disk_chunk_size	65536	Size of chunks read during auditing
files_per_second	20	Maximum files audited per second per auditor process. Should be tuned according to individual system specs. 0 is unlimited.
bytes_per_second	10000000	Maximum bytes audited per second per auditor process. Should be tuned according to individual system specs. 0 is unlimited.
concurrency zero_byte_files_per_second object_size_stats	1 50	The number of parallel processes to use for checksum auditing.
recon_cache_path	/var/cache/swift	Path to recon cache
rsync_tempfile_timeout	auto	Time elapsed in seconds before rsync tempfiles will be unlinked. Config value of "auto" try to use object-replicator's rsync_timeout + 900 or fallback to 86400 (1 day).
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

Container Server Configuration

An example Container Server configuration can be found at etc/container-server.conf-sample in the source code repository.

The following configuration sections are available:

• [DEFAULT] <container_server_default_options>
• [container-server]
• [container-replicator]
• [container-updater]
• [container-auditor]

[DEFAULT]

Option	Default	Description
swift_dir	/etc/swift	Swift configuration directory
devices	/srv/node	Parent directory of where devices are mounted
mount_check	true	Whether or not check if the devices are mounted to prevent accidentally writing to the root device
bind_ip	0.0.0.0	IP Address for server to bind to
bind_port	6201	Port for server to bind to
bind_timeout	30	Seconds to attempt bind before giving up
backlog	4096	Maximum number of allowed pending connections
workers	auto	Override the number of pre-forked workers that will accept connections. If set it should be an integer, zero means no fork. If unset, it will try to default to the number of effective cpu cores and fallback to one. Increasing the number of workers may reduce the possibility of slow file system operations in one request from negatively impacting other requests. See general-service-tuning.
max_clients	1024	Maximum number of clients one worker can process simultaneously (it will actually accept(2) N + 1). Setting this to one (1) will only handle one request at a time, without accepting another request concurrently.
user	swift	User to run as
disable_fallocate	false	Disable "fast fail" fallocate checks if the underlying filesystem does not support it.
log_name	swift	Label used when logging
log_facility	LOG_LOCAL0	Syslog log facility
log_level	INFO	Logging level
log_address	/dev/log	Logging directory
log_max_line_length	0	Caps the length of log lines to the value given; no limit if set to 0, the default.
log_custom_handlers log_udp_host	None	Comma-separated list of functions to call to setup custom log handlers. Override log_address
log_udp_port	514	UDP log port
log_statsd_host log_statsd_port log_statsd_default_sample_rate log_statsd_sample_rate_factor log_statsd_metric_prefix	None 8125 1.0 1.0	Enables StatsD logging; IPv4/IPv6 address or a hostname. If a hostname resolves to an IPv4 and IPv6 address, the IPv4 address will be used.
eventlet_debug	false	If true, turn on debug logging for eventlet
fallocate_reserve	1%	You can set fallocate_reserve to the number of bytes or percentage of disk space you'd like fallocate to reserve, whether there is space for the given file size or not. Percentage will be used if the value ends with a '%'. This is useful for systems that behave badly when they completely run out of space; you can make the services pretend they're out of space early.
db_preallocation	off	If you don't mind the extra disk space usage in overhead, you can turn this on to preallocate disk space with SQLite databases to decrease fragmentation.
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

[container-server]

Option	Default	Description
use		paste.deploy entry point for the container server. For most cases, this should be egg:swift#container.
set log_name	container-server	Label used when logging
set log_facility	LOG_LOCAL0	Syslog log facility
set log_level	INFO	Logging level
set log_requests	True	Whether or not to log each request
set log_address	/dev/log	Logging directory
node_timeout	3	Request timeout to external services
conn_timeout	0.5	Connection timeout to external services
allow_versions	false	Enable/Disable object versioning feature
auto_create_account_prefix replication_server	.	Prefix used when automatically Configure parameter for creating specific server. To handle all verbs, including replication verbs, do not specify "replication_server" (this is the default). To only handle replication, set to a True value (e.g. "True" or "1"). To handle only non-replication verbs, set to "False". Unless you have a separate replication network, you should not specify any value for "replication_server".
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

[container-replicator]

Option	Default	Description
log_name	container-replicator	Label used when logging
log_facility	LOG_LOCAL0	Syslog log facility
log_level	INFO	Logging level
log_address	/dev/log	Logging directory
per_diff	1000	Maximum number of database rows that will be sync'd in a single HTTP replication request. Databases with less than or equal to this number of differing rows will always be sync'd using an HTTP replication request rather than using rsync.
max_diffs	100	Maximum number of HTTP replication requests attempted on each replication pass for any one container. This caps how long the replicator will spend trying to sync a given database per pass so the other databases don't get starved.
concurrency	8	Number of replication workers to spawn
interval	30	Time in seconds to wait between replication passes
node_timeout	10	Request timeout to external services
conn_timeout	0.5	Connection timeout to external services
reclaim_age	604800	Time elapsed in seconds before a container can be reclaimed
rsync_module	{replication_ip}::container	Format of the rsync module where the replicator will send data. The configuration value can include some variables that will be extracted from the ring. Variables must follow the format {NAME} where NAME is one of: ip, port, replication_ip, replication_port, region, zone, device, meta. See etc/rsyncd.conf-sample for some examples.
rsync_compress	no	Allow rsync to compress data which is transmitted to destination node during sync. However, this is applicable only when destination node is in a different region than the local one. NOTE: Objects that are already compressed (for example: .tar.gz, mp3) might slow down the syncing process.
recon_cache_path	/var/cache/swift	Path to recon cache
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

[container-updater]

Option	Default	Description
log_name	container-updater	Label used when logging
log_facility	LOG_LOCAL0	Syslog log facility
log_level	INFO	Logging level
log_address	/dev/log	Logging directory
interval	300	Minimum time for a pass to take
concurrency	4	Number of updater workers to spawn
node_timeout	3	Request timeout to external services
conn_timeout	0.5	Connection timeout to external services
containers_per_second	50	Maximum containers updated per second. Should be tuned according to individual system specs. 0 is unlimited.
slowdown	0.01	Time in seconds to wait between containers. Deprecated in favor of containers_per_second.
account_suppression_time	60	Seconds to suppress updating an account that has generated an error (timeout, not yet found, etc.)
recon_cache_path	/var/cache/swift	Path to recon cache
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

[container-auditor]

Option	Default	Description
log_name	container-auditor	Label used when logging
log_facility	LOG_LOCAL0	Syslog log facility
log_level	INFO	Logging level
log_address	/dev/log	Logging directory
interval	1800	Minimum time for a pass to take
containers_per_second	200	Maximum containers audited per second. Should be tuned according to individual system specs. 0 is unlimited.
recon_cache_path	/var/cache/swift	Path to recon cache
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

Account Server Configuration

An example Account Server configuration can be found at etc/account-server.conf-sample in the source code repository.

The following configuration sections are available:

• [DEFAULT] <account_server_default_options>
• [account-server]
• [account-replicator]
• [account-auditor]
• [account-reaper]

[DEFAULT]

Option	Default	Description
swift_dir	/etc/swift	Swift configuration directory
devices	/srv/node	Parent directory or where devices are mounted
mount_check	true	Whether or not check if the devices are mounted to prevent accidentally writing to the root device
bind_ip	0.0.0.0	IP Address for server to bind to
bind_port	6202	Port for server to bind to
bind_timeout	30	Seconds to attempt bind before giving up
backlog	4096	Maximum number of allowed pending connections
workers	auto	Override the number of pre-forked workers that will accept connections. If set it should be an integer, zero means no fork. If unset, it will try to default to the number of effective cpu cores and fallback to one. Increasing the number of workers may reduce the possibility of slow file system operations in one request from negatively impacting other requests. See general-service-tuning.
max_clients	1024	Maximum number of clients one worker can process simultaneously (it will actually accept(2) N + 1). Setting this to one (1) will only handle one request at a time, without accepting another request concurrently.
user	swift	User to run as
db_preallocation	off	If you don't mind the extra disk space usage in overhead, you can turn this on to preallocate disk space with SQLite databases to decrease fragmentation.
disable_fallocate	false	Disable "fast fail" fallocate checks if the underlying filesystem does not support it.
log_name	swift	Label used when logging
log_facility	LOG_LOCAL0	Syslog log facility
log_level	INFO	Logging level
log_address	/dev/log	Logging directory
log_max_line_length	0	Caps the length of log lines to the value given; no limit if set to 0, the default.
log_custom_handlers log_udp_host	None	Comma-separated list of functions to call to setup custom log handlers. Override log_address
log_udp_port	514	UDP log port
log_statsd_host log_statsd_port log_statsd_default_sample_rate log_statsd_sample_rate_factor log_statsd_metric_prefix	None 8125 1.0 1.0	Enables StatsD logging; IPv4/IPv6 address or a hostname. If a hostname resolves to an IPv4 and IPv6 address, the IPv4 address will be used.
eventlet_debug	false	If true, turn on debug logging for eventlet
fallocate_reserve	1%	You can set fallocate_reserve to the number of bytes or percentage of disk space you'd like fallocate to reserve, whether there is space for the given file size or not. Percentage will be used if the value ends with a '%'. This is useful for systems that behave badly when they completely run out of space; you can make the services pretend they're out of space early.
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

[account-server]

Option	Default	Description
use		Entry point for paste.deploy for the account server. For most cases, this should be egg:swift#account.
set log_name	account-server	Label used when logging
set log_facility	LOG_LOCAL0	Syslog log facility
set log_level	INFO	Logging level
set log_requests	True	Whether or not to log each request
set log_address	/dev/log	Logging directory
auto_create_account_prefix replication_server	.	Prefix used when automatically creating accounts. Configure parameter for creating specific server. To handle all verbs, including replication verbs, do not specify "replication_server" (this is the default). To only handle replication, set to a True value (e.g. "True" or "1"). To handle only non-replication verbs, set to "False". Unless you have a separate replication network, you should not specify any value for "replication_server".
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

[account-replicator]

Option	Default	Description
log_name	account-replicator	Label used when logging
log_facility	LOG_LOCAL0	Syslog log facility
log_level	INFO	Logging level
log_address	/dev/log	Logging directory
per_diff	1000	Maximum number of database rows that will be sync'd in a single HTTP replication request. Databases with less than or equal to this number of differing rows will always be sync'd using an HTTP replication request rather than using rsync.
max_diffs	100	Maximum number of HTTP replication requests attempted on each replication pass for any one container. This caps how long the replicator will spend trying to sync a given database per pass so the other databases don't get starved.
concurrency	8	Number of replication workers to spawn
interval	30	Time in seconds to wait between replication passes
node_timeout	10	Request timeout to external services
conn_timeout	0.5	Connection timeout to external services
reclaim_age	604800	Time elapsed in seconds before an account can be reclaimed
rsync_module	{replication_ip}::account	Format of the rsync module where the replicator will send data. The configuration value can include some variables that will be extracted from the ring. Variables must follow the format {NAME} where NAME is one of: ip, port, replication_ip, replication_port, region, zone, device, meta. See etc/rsyncd.conf-sample for some examples.
rsync_compress	no	Allow rsync to compress data which is transmitted to destination node during sync. However, this is applicable only when destination node is in a different region than the local one. NOTE: Objects that are already compressed (for example: .tar.gz, mp3) might slow down the syncing process.
recon_cache_path	/var/cache/swift	Path to recon cache
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

[account-auditor]

Option	Default	Description
log_name	account-auditor	Label used when logging
log_facility	LOG_LOCAL0	Syslog log facility
log_level	INFO	Logging level
log_address	/dev/log	Logging directory
interval	1800	Minimum time for a pass to take
accounts_per_second	200	Maximum accounts audited per second. Should be tuned according to individual system specs. 0 is unlimited.
recon_cache_path	/var/cache/swift	Path to recon cache
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

[account-reaper]

Option	Default	Description
log_name	account-reaper	Label used when logging
log_facility	LOG_LOCAL0	Syslog log facility
log_level	INFO	Logging level
log_address	/dev/log	Logging directory
concurrency	25	Number of replication workers to spawn
interval	3600	Minimum time for a pass to take
node_timeout	10	Request timeout to external services
conn_timeout	0.5	Connection timeout to external services
delay_reaping	0	Normally, the reaper begins deleting account information for deleted accounts immediately; you can set this to delay its work however. The value is in seconds, 2592000 = 30 days, for example. The sum of this value and the container-updater interval should be less than the account-replicator reclaim_age. This ensures that once the account-reaper has deleted a container there is sufficient time for the container-updater to report to the account before the account DB is removed.
reap_warn_after	2892000	If the account fails to be be reaped due to a persistent error, the account reaper will log a message such as: Account <name> has not been reaped since <date> You can search logs for this message if space is not being reclaimed after you delete account(s). This is in addition to any time requested by delay_reaping.
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

Proxy Server Configuration

An example Proxy Server configuration can be found at etc/proxy-server.conf-sample in the source code repository.

The following configuration sections are available:

• [DEFAULT] <proxy_server_default_options>
• [proxy-server]
• Individual sections for Proxy middlewares

[DEFAULT]

Option	Default	Description
bind_ip	0.0.0.0	IP Address for server to bind to
bind_port	80	Port for server to bind to
bind_timeout	30	Seconds to attempt bind before giving up
backlog	4096	Maximum number of allowed pending connections
swift_dir	/etc/swift	Swift configuration directory
workers	auto	Override the number of pre-forked workers that will accept connections. If set it should be an integer, zero means no fork. If unset, it will try to default to the number of effective cpu cores and fallback to one. See general-service-tuning.
max_clients	1024	Maximum number of clients one worker can process simultaneously (it will actually accept(2) N + 1). Setting this to one (1) will only handle one request at a time, without accepting another request concurrently.
user cert_file key_file cors_allow_origin strict_cors_mode cors_expose_headers client_timeout trans_id_suffix	swift True 60	User to run as Path to the ssl .crt. This should be enabled for testing purposes only. Path to the ssl .key. This should be enabled for testing purposes only. This is a list of hosts that are included with any CORS request by default and returned with the Access-Control-Allow-Origin header in addition to what the container has set. This is a list of headers that are included in the header Access-Control-Expose-Headers in addition to what the container has set. This optional suffix (default is empty) that would be appended to the swift transaction id allows one to easily figure out from which cluster that X-Trans-Id belongs to. This is very useful when one is managing more than one swift cluster.
log_name	swift	Label used when logging
log_facility	LOG_LOCAL0	Syslog log facility
log_level log_headers	INFO False	Logging level
log_address	/dev/log	Logging directory
log_max_line_length	0	Caps the length of log lines to the value given; no limit if set to 0, the default.
log_custom_handlers log_udp_host	None	Comma separated list of functions to call to setup custom log handlers. Override log_address
log_udp_port	514	UDP log port
log_statsd_host log_statsd_port log_statsd_default_sample_rate log_statsd_sample_rate_factor log_statsd_metric_prefix	None 8125 1.0 1.0	Enables StatsD logging; IPv4/IPv6 address or a hostname. If a hostname resolves to an IPv4 and IPv6 address, the IPv4 address will be used.
eventlet_debug	false	If true, turn on debug logging for eventlet
expose_info admin_key	true	Enables exposing configuration settings via HTTP GET /info. Key to use for admin calls that are HMAC signed. Default is empty, which will disable admin calls to /info.
disallowed_sections expiring_objects_container_divisor expiring_objects_account_name	swift.valid_api_versions 86400 expiring_objects	Allows the ability to withhold sections from showing up in the public calls to /info. You can withhold subsections by separating the dict level with a ".".
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

[proxy-server]

Option	Default	Description
use		Entry point for paste.deploy for the proxy server. For most cases, this should be egg:swift#proxy.
set log_name	proxy-server	Label used when logging
set log_facility	LOG_LOCAL0	Syslog log facility
set log_level	INFO	Log level
set log_headers	True	If True, log headers in each request
set log_handoffs	True	If True, the proxy will log whenever it has to failover to a handoff node
recheck_account_existence	60	Cache timeout in seconds to send memcached for account existence
recheck_container_existence	60	Cache timeout in seconds to send memcached for container existence
object_chunk_size	65536	Chunk size to read from object servers
client_chunk_size	65536	Chunk size to read from clients
memcache_servers	127.0.0.1:11211	Comma separated list of memcached servers ip:port or [ipv6addr]:port
memcache_max_connections	2	Max number of connections to each memcached server per worker
node_timeout	10	Request timeout to external services
recoverable_node_timeout	node_timeout	Request timeout to external services for requests that, on failure, can be recovered from. For example, object GET.
client_timeout	60	Timeout to read one chunk from a client
conn_timeout	0.5	Connection timeout to external services
error_suppression_interval	60	Time in seconds that must elapse since the last error for a node to be considered no longer error limited
error_suppression_limit	10	Error count to consider a node error limited
allow_account_management	false	Whether account PUTs and DELETEs are even callable
account_autocreate	false	If set to 'true' authorized accounts that do not yet exist within the Swift cluster will be automatically created.
max_containers_per_account max_containers_whitelist	0	If set to a positive value, trying to create a container when the account already has at least this maximum containers will result in a 403 Forbidden. Note: This is a soft limit, meaning a user might exceed the cap for recheck_account_existence before the 403s kick in. This is a comma separated list of account names that ignore the max_containers_per_account cap.
rate_limit_after_segment	10	Rate limit the download of large object segments after this segment is downloaded.
rate_limit_segments_per_sec	1	Rate limit large object downloads at this rate.
request_node_count	2 * replicas	Set to the number of nodes to contact for a normal request. You can use '* replicas' at the end to have it use the number given times the number of replicas for the ring being used for the request.
swift_owner_headers	<see the sample conf file for the list of default headers>	These are the headers whose values will only be shown to swift_owners. The exact definition of a swift_owner is up to the auth system in use, but usually indicates administrative responsibilities.
sorting_method	shuffle	Storage nodes can be chosen at random (shuffle), by using timing measurements (timing), or by using an explicit match (affinity). Using timing measurements may allow for lower overall latency, while using affinity allows for finer control. In both the timing and affinity cases, equally-sorting nodes are still randomly chosen to spread load. This option may be overridden in a per-policy configuration section.
timing_expiry	300	If the "timing" sorting_method is used, the timings will only be valid for the number of seconds configured by timing_expiry.
concurrent_gets	off	Use replica count number of threads concurrently during a GET/HEAD and return with the first successful response. In the EC case, this parameter only affects an EC HEAD as an EC GET behaves differently.
concurrency_timeout	conn_timeout	This parameter controls how long to wait before firing off the next concurrent_get thread. A value of 0 would we fully concurrent, any other number will stagger the firing of the threads. This number should be between 0 and node_timeout. The default is conn_timeout (0.5).
nice_priority	None	Scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority.
ionice_class	None	I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort), and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Linux supports io scheduling priorities and classes since 2.6.13 with the CFQ io scheduler. Work only with ionice_priority.
ionice_priority	None	I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.
read_affinity	None	Specifies which backend servers to prefer on reads; used in conjunction with the sorting_method option being set to 'affinity'. Format is a comma separated list of affinity descriptors of the form <selection>=<priority>. The <selection> may be r<N> for selecting nodes in region N or r<N>z<M> for selecting nodes in region N, zone M. The <priority> value should be a whole number that represents the priority to be given to the selection; lower numbers are higher priority. Default is empty, meaning no preference. This option may be overridden in a per-policy configuration section.
write_affinity	None	Specifies which backend servers to prefer on writes. Format is a comma separated list of affinity descriptors of the form r<N> for region N or r<N>z<M> for region N, zone M. Default is empty, meaning no preference. This option may be overridden in a per-policy configuration section.
write_affinity_node_count	2 * replicas	The number of local (as governed by the write_affinity setting) nodes to attempt to contact first on writes, before any non-local ones. The value should be an integer number, or use '* replicas' at the end to have it use the number given times the number of replicas for the ring being used for the request. This option may be overridden in a per-policy configuration section.
write_affinity_handoff_delete_count	auto	The number of local (as governed by the write_affinity setting) handoff nodes to attempt to contact on deletion, in addition to primary nodes. Example: in geographically distributed deployment, If replicas=3, sometimes there may be 1 primary node and 2 local handoff nodes in one region holding the object after uploading but before object replicated to the appropriate locations in other regions. In this case, include these handoff nodes to send request when deleting object could help make correct decision for the response. The default value 'auto' means Swift will calculate the number automatically, the default value is (replicas - len(local_primary_nodes)). This option may be overridden in a per-policy configuration section.

Per policy configuration

Some proxy-server configuration options may be overridden for individual overview_policies by including per-policy config section(s). These options are:

• sorting_method
• read_affinity
• write_affinity
• write_affinity_node_count
• write_affinity_handoff_delete_count

The per-policy config section name must be of the form:

[proxy-server:policy:<policy index>]

Note

The per-policy config section name should refer to the policy index, not the policy name.

Note

The first part of proxy-server config section name must match the name of the proxy-server config section. This is typically proxy-server as shown above, but if different then the names of any per-policy config sections must be changed accordingly.

The value of an option specified in a per-policy section will override any value given in the proxy-server section for that policy only. Otherwise the value of these options will be that specified in the proxy-server section.

For example, the following section provides policy-specific options for a policy with index 3:

[proxy-server:policy:3]
sorting_method = affinity
read_affinity = r2=1
write_affinity = r2
write_affinity_node_count = 1 * replicas
write_affinity_handoff_delete_count = 2

Note

It is recommended that per-policy config options are not included in the [DEFAULT] section. If they are then the following behavior applies.

Per-policy config sections will inherit options in the [DEFAULT] section of the config file, and any such inheritance will take precedence over inheriting options from the proxy-server config section.

Per-policy config section options will override options in the [DEFAULT] section. Unlike the behavior described under General Server Configuration for paste-deploy filter and app sections, the set keyword is not required for options to override in per-policy config sections.

For example, given the following settings in a config file:

[DEFAULT]
sorting_method = affinity
read_affinity = r0=100
write_affinity = r0

[app:proxy-server]
use = egg:swift#proxy
# use of set keyword here overrides [DEFAULT] option
set read_affinity = r1=100
# without set keyword, [DEFAULT] option overrides in a paste-deploy section
write_affinity = r1

[proxy-server:policy:0]
sorting_method = affinity
# set keyword not required here to override [DEFAULT] option
write_affinity = r1

would result in policy with index 0 having settings:

• read_affinity = r0=100 (inherited from the [DEFAULT] section)
• write_affinity = r1 (specified in the policy 0 section)

and any other policy would have the default settings of:

• read_affinity = r1=100 (set in the proxy-server section)
• write_affinity = r0 (inherited from the [DEFAULT] section)

Proxy Middlewares

Many features in Swift are implemented as middleware in the proxy-server pipeline. See middleware and the proxy-server.conf-sample file for more information. In particular, the use of some type of authentication and authorization middleware <overview_auth> is highly recommended.

Memcached Considerations

Several of the Services rely on Memcached for caching certain types of lookups, such as auth tokens, and container/account existence. Swift does not do any caching of actual object data. Memcached should be able to run on any servers that have available RAM and CPU. At Rackspace, we run Memcached on the proxy servers. The memcache_servers config option in the proxy-server.conf should contain all memcached servers.

System Time

Time may be relative but it is relatively important for Swift! Swift uses timestamps to determine which is the most recent version of an object. It is very important for the system time on each server in the cluster to by synced as closely as possible (more so for the proxy server, but in general it is a good idea for all the servers). At Rackspace, we use NTP with a local NTP server to ensure that the system times are as close as possible. This should also be monitored to ensure that the times do not vary too much.

General Service Tuning

Most services support either a worker or concurrency value in the settings. This allows the services to make effective use of the cores available. A good starting point to set the concurrency level for the proxy and storage services to 2 times the number of cores available. If more than one service is sharing a server, then some experimentation may be needed to find the best balance.

At Rackspace, our Proxy servers have dual quad core processors, giving us 8 cores. Our testing has shown 16 workers to be a pretty good balance when saturating a 10g network and gives good CPU utilization.

Our Storage server processes all run together on the same servers. These servers have dual quad core processors, for 8 cores total. We run the Account, Container, and Object servers with 8 workers each. Most of the background jobs are run at a concurrency of 1, with the exception of the replicators which are run at a concurrency of 2.

The max_clients parameter can be used to adjust the number of client requests an individual worker accepts for processing. The fewer requests being processed at one time, the less likely a request that consumes the worker's CPU time, or blocks in the OS, will negatively impact other requests. The more requests being processed at one time, the more likely one worker can utilize network and disk capacity.

On systems that have more cores, and more memory, where one can afford to run more workers, raising the number of workers and lowering the maximum number of clients serviced per worker can lessen the impact of CPU intensive or stalled requests.

The nice_priority parameter can be used to set program scheduling priority. The ionice_class and ionice_priority parameters can be used to set I/O scheduling class and priority on the systems that use an I/O scheduler that supports I/O priorities. As at kernel 2.6.17 the only such scheduler is the Completely Fair Queuing (CFQ) I/O scheduler. If you run your Storage servers all together on the same servers, you can slow down the auditors or prioritize object-server I/O via these parameters (but probably do not need to change it on the proxy). It is a new feature and the best practices are still being developed. On some systems it may be required to run the daemons as root. For more info also see setpriority(2) and ioprio_set(2).

The above configuration setting should be taken as suggestions and testing of configuration settings should be done to ensure best utilization of CPU, network connectivity, and disk I/O.

Filesystem Considerations

Swift is designed to be mostly filesystem agnostic--the only requirement being that the filesystem supports extended attributes (xattrs). After thorough testing with our use cases and hardware configurations, XFS was the best all-around choice. If you decide to use a filesystem other than XFS, we highly recommend thorough testing.

For distros with more recent kernels (for example Ubuntu 12.04 Precise), we recommend using the default settings (including the default inode size of 256 bytes) when creating the file system:

mkfs.xfs /dev/sda1

In the last couple of years, XFS has made great improvements in how inodes are allocated and used. Using the default inode size no longer has an impact on performance.

For distros with older kernels (for example Ubuntu 10.04 Lucid), some settings can dramatically impact performance. We recommend the following when creating the file system:

mkfs.xfs -i size=1024 /dev/sda1

Setting the inode size is important, as XFS stores xattr data in the inode. If the metadata is too large to fit in the inode, a new extent is created, which can cause quite a performance problem. Upping the inode size to 1024 bytes provides enough room to write the default metadata, plus a little headroom.

The following example mount options are recommended when using XFS:

mount -t xfs -o noatime,nodiratime,nobarrier,logbufs=8 /dev/sda1 /srv/node/sda

We do not recommend running Swift on RAID, but if you are using RAID it is also important to make sure that the proper sunit and swidth settings get set so that XFS can make most efficient use of the RAID array.

For a standard Swift install, all data drives are mounted directly under /srv/node (as can be seen in the above example of mounting /dev/sda1 as /srv/node/sda). If you choose to mount the drives in another directory, be sure to set the devices config option in all of the server configs to point to the correct directory.

The mount points for each drive in /srv/node/ should be owned by the root user almost exclusively (root:root 755). This is required to prevent rsync from syncing files into the root drive in the event a drive is unmounted.

Swift uses system calls to reserve space for new objects being written into the system. If your filesystem does not support fallocate() or posix_fallocate(), be sure to set the disable_fallocate = true config parameter in account, container, and object server configs.

Most current Linux distributions ship with a default installation of updatedb. This tool runs periodically and updates the file name database that is used by the GNU locate tool. However, including Swift object and container database files is most likely not required and the periodic update affects the performance quite a bit. To disable the inclusion of these files add the path where Swift stores its data to the setting PRUNEPATHS in `/etc/updatedb.conf`:

PRUNEPATHS="... /tmp ... /var/spool ... /srv/node"

General System Tuning

Rackspace currently runs Swift on Ubuntu Server 10.04, and the following changes have been found to be useful for our use cases.

The following settings should be in `/etc/sysctl.conf`:

# disable TIME_WAIT.. wait..
net.ipv4.tcp_tw_recycle=1
net.ipv4.tcp_tw_reuse=1

# disable syn cookies
net.ipv4.tcp_syncookies = 0

# double amount of allowed conntrack
net.ipv4.netfilter.ip_conntrack_max = 262144

To load the updated sysctl settings, run sudo sysctl -p

A note about changing the TIME_WAIT values. By default the OS will hold a port open for 60 seconds to ensure that any remaining packets can be received. During high usage, and with the number of connections that are created, it is easy to run out of ports. We can change this since we are in control of the network. If you are not in control of the network, or do not expect high loads, then you may not want to adjust those values.

Logging Considerations

Swift is set up to log directly to syslog. Every service can be configured with the log_facility option to set the syslog log facility destination. We recommended using syslog-ng to route the logs to specific log files locally on the server and also to remote log collecting servers. Additionally, custom log handlers can be used via the custom_log_handlers setting.