starlingx/docs
Code Issues Proposed changes

SX or DX/Standard deployment fails.

Browse Source 
Minor formatting update.

Added a note in the Prerequites section to prevent fails during upgrades.

Signed-off-by: Elaine Fonaro <elaine.fonaro@windriver.com>
Change-Id: I7456a0d4100127e93ce30cb337310786981a731d
This commit is contained in:
Elaine Fonaro 2022-04-08 17:07:34 -03:00
parent 8180f26641
commit 9464009c7e
2 changed files with 16 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
doc/source/updates/kubernetes/upgrading-all-in-one-duplex-or-standard.rst
View File

@ -27,6 +27,12 @@ of |prod| software.
- Transfer the new release software load to controller-0 \(or onto a USB
stick\); controller-0 must be active.
.. note::
Make sure that the ``/home/sysadmin`` directory has enough space
(at least 2GB of free space), otherwise the upgrade may fail once it
starts. If more space is needed, it is recommended to delete the
``.iso bootimage`` previously imported after the `load-import` command.
- Transfer the new release software license file to controller-0, \(or onto a
USB stick\).
@ -87,7 +93,7 @@ of |prod| software.
relative paths.
.. note::
This can take a few minutes to complete.
This will take a few minutes to complete.
#. Check to ensure the load was successfully imported.

12
doc/source/updates/kubernetes/upgrading-all-in-one-simplex.rst
View File

@ -35,6 +35,12 @@ software.
- Transfer the new release software load to controller-0 \(or onto a USB
stick\); controller-0 must be active.
.. note::
Make sure that the ``/home/sysadmin`` directory has enough space
(at least 2GB of free space), otherwise the upgrade may fail once it
starts. If more space is needed, it is recommended to delete the
``.iso bootimage`` previously imported after the `load-import` command.
- Transfer the new release software license file to controller-0 \(or onto a
USB stick\).
@ -99,6 +105,9 @@ the system contains more than 5 GBytes of these images, the upgrade start will f
The :command:`load-import` must be done on **controller-0** and accepts
relative paths.
.. note::
This will take a few minutes to complete.
#. Check to ensure the load was successfully imported.
.. code-block:: none
@ -111,9 +120,6 @@ the system contains more than 5 GBytes of these images, the upgrade start will f
| 2 | imported | nn.nn |
+----+----------+------------------+
.. note::
This will take a few minutes.
#. Apply any required software updates.
The system must be 'patch current'. All software updates related to your