starlingx/docs
Code Issues Proposed changes
docs/doc/source/dist_cloud/kubernetes/manage-management-network-parameters-for-a-standalone-aiosx-18c7aaace64d.rst
Elisamara Aoki Goncalves a46bf0c65f Platform Management Network Reconfiguration - AIO-SX 
Add procedure to configure management network after install for AIO-SX only.

Story: 2010722
Task: 50146

Change-Id: I50d323b903e83be46f01917619f0ee90179d1e69
Signed-off-by: Elisamara Aoki Goncalves <elisamaraaoki.goncalves@windriver.com>
2024-08-27 19:11:19 +00:00

1.6 KiB
Raw Permalink Blame History

Manage Management Network Parameters for a Standalone AIO-SX

You can change the management IP addresses for a standalone .

Ensure that the host has been backed up, in case a system recovery is required.

Change the Network Parameters of the Management Network for Standalone AIO-SX Only

This task is required only if the management network need to be changed for a standalone .

  1. Lock the controller.

    system host-lock controller-0

  2. Obtain the UUID of the management pool.

    system addrpool-list

  3. Modify the management address pool.

    For example:

    system addrpool-modify $UUID \
  --network              192.168.207.0 \
  --prefix                    24 \
  --floating-address         192.168.207.2 \
  --controller0-address  192.168.207.3 \
  --controller1-address  192.168.207.4 \
  --gateway-address       192.168.207.1 \
  --ranges                192.168.207.1-192.168.207.50

  4. Unlock the controller.

    system host-unlock controller-0