starlingx/docs
Code Issues Proposed changes
docs/doc/source/node_management/kubernetes/node_interfaces/configuring-ethernet-interfaces-on-sriov-interface-from-horizon.rst
egoncalv 52c80d93c7 Fixed step numbering 
Patch 1: Acted on comments by Mary

https://review.opendev.org/c/starlingx/docs/+/787545

https://bugs.launchpad.net/starlingx/+bug/1925071

Signed-off-by: egoncalv <elisamaraaoki.goncalves@windriver.com>
Change-Id: I0577a84e98aae6d324742d841a2844af92f1ba0f
2021-04-22 16:48:07 -03:00

2.0 KiB
Raw Blame History

Configure Ethernet Interfaces on SR-IOV Interface Using Horizon

You can use the Horizon web interface to configure Ethernet interfaces on .

You must create an interface before you can provision an Ethernet interface. For more information, see Provisioning SR-IOV Interfaces using the CLI <provisioning-sr-iov-interfaces-using-the-cli>.

  1. Open the Host Inventory page, available from Admin > Platform > Host Inventory in the left-hand panel, under Actions click on the down arrow button on "Edit Host" and select "Lock Host".

    image

  2. Open the Host Detail page for the host.

    1. Open the Host Inventory page, available from Admin > Platform > Host Inventory in the left-hand pane.
    2. Select the Hosts tab, and then in the Host Name column, click the name of the host.

  3. Select the Interfaces tab.

    image

  4. Open the Host Inventory page, available from Admin > Platform > Host Inventory in the left-hand panel, under Actions click on the down arrow button on "Edit Host" and select "Unlock Host".

  5. Click Create Interface.

  6. Open the Interface Class drop-down menu and select platform.

  7. Open the Interface Type drop-down menu and select ethernet.

  8. Select the Ethernet interface used to attach this interface to the network from the Interfaces(s) list.

  9. From the Platform Network(s) list, select pxeboot to which this interface is attached.

  10. Click Create Interface to save your changes and close the dialog box.

    image