starlingx/docs
Code Issues Proposed changes
docs/doc/source/dist_cloud/kubernetes/update-orchestration-of-central-clouds-regionone-and-subclouds-using-the-cli.rst
MCamp859 4a59519f6b Replace stx with prefix substitution (1 of 3) 
First review in a group to change instances of
stx-openstack to |prefix|-openstack

This group includes non-install guides.

Fixed 1 file.

Change-Id: Ib7e03b64373ca5e608be8b082ac2f26be5a4e50a
Signed-off-by: MCamp859 <maryx.camp@intel.com>
2021-11-16 20:35:02 -05:00

351 lines
15 KiB
ReStructuredText
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

.. fql1558615252466
.. _update-orchestration-of-central-clouds-regionone-and-subclouds-using-the-cli:
=============================================================================
Update Orchestration of Central Cloud's RegionOne and Subclouds Using the CLI
=============================================================================
For |prod-dc| update orchestration, you can use the :command:`dcmanager`
commands from the command line interface. These are similar to the
:command:`sw-manager` commands used to define and execute update strategies on
non-distributed systems.
.. contents:: |minitoc|
:local:
:depth: 1
To use the Horizon Web interface instead, see :ref:`Update Orchestration of
Central Cloud's RegionOne and Subclouds
<update-orchestration-of-central-clouds-regionone-and-subclouds>`.
.. note::
Before you can use |prod-dc| update orchestration, you must upload and
apply one or more updates to the SystemController / central update
repository. For more information, see :ref:`Uploading and Applying Updates
to SystemController Using the CLI
<uploading-and-applying-updates-to-systemcontroller-using-the-cli>`.
.. _update-orchestration-of-central-clouds-regionone-and-subclouds-using-the-cli-section-N10087-N10029-N10001:
-----------------------
Patch Strategy Settings
-----------------------
The update strategy for a |prod-dc| system controls how updates are applied to
the Central Cloud's RegionOne and the subclouds. The following settings are
available:
**subcloud apply type**
parallel or serial — determines whether the subclouds are updated in
parallel, or serially.
If this is not specified using the |CLI|, the values for
:command:`subcloud\_update\_type` defined for each subcloud group will be
used by default.
**maximum parallel subclouds**
Sets the maximum number of subclouds that can be updated in parallel \(default 20\).
If this is not specified using the |CLI|, the values for
:command:`max\_parallel\_subclouds` defined for each subcloud group will be
used by default.
**stop on failure**
true \(default\) or false — determines whether update orchestration failure
for a subcloud prevents application to subsequent subclouds.
.. _update-orchestration-of-central-clouds-regionone-and-subclouds-using-the-cli-ul-blq-nmx-fdb:
- To create a update strategy, use the :command:`patch-strategy create` command.
.. code-block:: none
~(keystone_admin)]$ dcmanager patch-strategy create \
[--subcloud-apply-type <type>] \
[–-max-parallel-subclouds <i>] \
[–-stop-on-failure <level>] \
[--group group] \
[<subcloud>]
For example:
.. code-block:: none
~(keystone_admin)]$ dcmanager patch-strategy create --group 10
+------------------------+----------------------------+
| Field | Value |
+------------------------+----------------------------+
| subcloud apply type | parallel |
| max parallel subclouds | 10 |
| stop on failure | False |
| state | initial |
| created_at | 2021-01-07T14:54:58.634476 |
| updated_at | None |
+------------------------+----------------------------+
.. note::
You can optionally pass the name or ID of a subcloud group to the
:command:`patch-strategy create` command. This results in a strategy
that is applied only to the System Controller and all subclouds in the
specified group. The subcloud group values are used for subcloud apply
type and max parallel subclouds parameters.
- To show the settings for the update strategy, use the
:command:`patch-strategy show` command.
For example:
.. code-block:: none
~(keystone_admin)]$ dcmanager patch-strategy show
+------------------------+----------------------------+
| Field | Value |
+------------------------+----------------------------+
| subcloud apply type | parallel |
| max parallel subclouds | 20 |
| stop on failure | False |
| state | initial |
| created_at | 2018-02-02T14:42:13.822499 |
| updated_at | None |
+------------------------+----------------------------+
.. note::
A value of **None** for **subcloud apply type**, and **max parallel
subclouds** indicates that subcloud group values are being used.
- To apply the update strategy, use the :command:`patch-strategy apply` command.
.. code-block:: none
~(keystone_admin)]$ dcmanager patch-strategy apply
+------------------------+----------------------------+
| Field | Value |
+------------------------+----------------------------+
| subcloud apply type | parallel |
| max parallel subclouds | 20 |
| stop on failure | False |
| state | applying |
| created_at | 2018-02-02T14:42:13.822499 |
| updated_at | 2018-02-02T14:42:19.376688 |
+------------------------+----------------------------+
- To show the step currently being performed on each of the subclouds, use
the :command:`strategy-step list` command.
For example:
.. code-block:: none
~(keystone_admin)]$ dcmanager strategy-step list
+------------------+-------+-------------+-----------------------------+----------------------------+----------------------------+
| cloud | stage | state | details | started_at | finished_at |
+------------------+-------+-------------+-----------------------------+----------------------------+----------------------------+
| SystemController | 1 | complete | | 2018-03-13 14:12:12.262001 | 2018-03-13 14:15:52.450908 |
| subcloud-1 | 2 | applying... | apply phase is 66% complete | 2018-03-13 14:16:02.457588 | None |
| subcloud-4 | 2 | applying... | apply phase is 83% complete | 2018-03-13 14:16:02.463213 | None |
| subcloud-5 | 2 | finishing | | 2018-03-13 14:16:02.473669 | None |
| subcloud-6 | 2 | applying... | apply phase is 66% complete | 2018-03-13 14:16:02.483422 | None |
+------------------+-------+-------------+-----------------------------+----------------------------+----------------------------+
- To show the step currently being performed on a subcloud, use the
:command:`strategy-step show` <subcloud> command.
.. code-block:: none
~(keystone_admin)]$ dcmanager strategy-step show <subcloud>
- To abort the current update orchestration operation, use the
:command:`patch-strategy abort` command.
.. note::
The :command:`dcmanager patch-strategy abort` command completes the
current updating stage before aborting, to prevent hosts from being
left in a locked state requiring manual intervention.
.. code-block:: none
~(keystone_admin)]$ dcmanager patch-strategy abort
- To delete a update strategy, use the :command:`patch-strategy delete` command.
.. code-block:: none
~(keystone_admin)]$ dcmanager patch-strategy delete
+------------------------+----------------------------+
| Field | Value |
+------------------------+----------------------------+
| subcloud apply type | parallel |
| max parallel subclouds | 20 |
| stop on failure | False |
| state | deleting |
| created_at | 2018-03-23T20:04:50.992444 |
| updated_at | 2018-03-23T20:05:14.157352 |
+------------------------+----------------------------+
.. _update-orchestration-of-central-clouds-regionone-and-subclouds-using-the-cli-section-N1022D-N10029-N10001:
------------------------------------
Configuration for Specific Subclouds
------------------------------------
To determine how updates are applied to the nodes on each subcloud and on
RegionOne, the update strategy refers to separate configuration settings. The
following settings are applied by default:
.. _update-orchestration-of-central-clouds-regionone-and-subclouds-using-the-cli-ul-sgb-p34-gdb:
- storage apply type: parallel
- worker apply type: parallel
- max parallel workers: 10
- alarm restriction type: relaxed
- default instance action: migrate
To update the default values, use the :command:`dcmanager patch-strategy-config
update` command. You can also use this command to configure custom behavior for
individual subclouds.
.. note::
Since re-location is not possible on a single-node |prod| Simplex system,
you must change the configuration to set default\_instance\_action to
stop-start.
.. _update-orchestration-of-central-clouds-regionone-and-subclouds-using-the-cli-ul-xfb-bfz-fdb:
- To list the default update strategy and any custom configurations
configured for individual subclouds, use the :command:`patch-strategy-config
list` command.
For example:
.. code-block:: none
~(keystone_admin)]$ dcmanager patch-strategy-config list
+--------------------+--------------------+--------------------+-----------------------+------------------------+------------------+
| cloud | storage apply type | worker apply type | max parallel workers | alarm restriction type | default instance |
| | | | | | action |
+--------------------+--------------------+--------------------+-----------------------+------------------------+------------------+
| all clouds default | parallel | parallel | 10 | relaxed | migrate |
| subcloud-6 | parallel | parallel | 2 | relaxed | stop-start |
+--------------------+--------------------+--------------------+-----------------------+------------------------+------------------+
- To show the configuration settings applicable to all subclouds by default,
use the :command:`patch-strategy-config show` command.
.. code-block:: none
~(keystone_admin)]$ dcmanager patch-strategy-config show
+-------------------------+--------------------+
| Field | Value |
+-------------------------+--------------------+
| cloud | all clouds default |
| storage apply type | parallel |
| worker apply type | parallel |
| max parallel workers | 10 |
| alarm restriction type | relaxed |
| default instance action | migrate |
| created_at | None |
| updated_at | None |
+-------------------------+--------------------+
- To update the settings, or to create a custom configuration for a subcloud,
use the :command:`patch-strategy-config update` command.
.. code-block:: none
~(keystone_admin)]$ dcmanager patch-strategy-config update \
\
–-storage-apply-type <type> \
–-worker-apply-type <type> \
–-max-parallel-workers <i> \
–-alarm-restriction-type <level> \
–-default-instance-action <action> \
[<subcloud_name>]
where
**storage apply type**
parallel or serial — determines whether storage nodes are updated in
parallel or serially.
**worker apply type**
parallel or serial — determines whether worker nodes are updated in
parallel or serially.
**max parallel workers**
Set the maximum number of worker nodes that can be updated in parallel.
**alarm restriction type**
relaxed or strict — determines whether the orchestration is aborted for
alarms that are not management-affecting. For more information, refer
to |updates-doc|: :ref:`Configure Update Orchestration <configuring-update-orchestration>`.
**default instance action**
.. note::
This parameter is only applicable to hosted application VMs with
the |prefix|-openstack application.
migrate or stop-start — determines whether hosted application VMs are
migrated or stopped and restarted when a worker host is upgraded.
**subcloud\_name**
The name of the subcloud to use the custom strategy. If this omitted,
the default update strategy is updated.
.. note::
You must specify all of the settings.
- To show the configuration settings for a subcloud, use the
:command:`patch-strategy-config show` <subcloud> command.
.. code-block:: none
~(keystone_admin)]$ dcmanager patch-strategy-config show [<name>]
For example:
.. code-block:: none
~(keystone_admin)]$ dcmanager patch-strategy-config show subcloud-6
+-------------------------+----------------------------+
| Field | Value |
+-------------------------+----------------------------+
| cloud | subcloud-6 |
| storage apply type | parallel |
| worker apply type | parallel |
| max parallel workers | 2 |
| alarm restriction type | relaxed |
| default instance action | stop-start |
| created_at | 2018-03-12 20:08:48.917866 |
| updated_at | None |
+-------------------------+----------------------------+
If custom configuration settings have not been created for the subcloud,
the following message is displayed:
.. code-block:: none
ERROR (app) No options found for Subcloud with id 1, defaults will be used.
View Git Blame Copy Permalink