docs/doc/source/system_configuration/kubernetes/configuring-ptp-service-using-the-cli.rst

Configure PTP Service Using the CLI

You can use the CLI to configure services.

For information on configuring the service for clock synchronization using the Horizon Web interface see Configure PTP Service Using Horizon <configuring-ptp-service-using-horizon>.

You can also specify the service for clock_synchronization using the web administration interface.

PTP Service

To view the existing status, use the following command.

~(keystone_admin)]$ system ptp-show
+--------------+--------------------------------------+
| Property     | Value                                |
+--------------+--------------------------------------+
| uuid         | 4844eca1-13bb-471e-9162-e5f2bb97d650 |
| mode         | hardware                             |
| transport    | l2                                   |
| mechanism    | e2e                                  |
| isystem_uuid | a16d7b07-1d42-41cf-b001-04bc25216a2b |
| created_at   | 2019-12-09T16:08:34.319374+00:00     |
| updated_at   | None                                 |
+--------------+--------------------------------------+

Warning

and are mutually exclusive on a particular host; only one can be enabled at any time.

The default value for clock_synchronization is ntp. Use the following command to change the clock synchronization on the host. and are configured per host. Lock/unlock the host when updating.

~(keystone_admin)]$ system host-update controller-0 clock_synchronization=ptp
+-----------------------+---------------------------------------+
| Property              | Value                                 |
+-----------------------+---------------------------------------+
| action                | none                                  |
| administrative        | unlocked                              |
| availability          | available                             |
| bm_ip                 | None                                  |
| bm_type               | None                                  |
| bm_username           | None                                  |
| boot_device           | /dev/disk/by-path/pci-0000:04:00.0-sas|
|                       |   -0x5001e6754aa38000-lun-0           |
| capabilities          | {u'stor_function': u'monitor'}        |
| clock_synchronization | ptp                                   |
| config_applied        | 590f29ad-19e2-43ee-855e-f765814e3ecd  |
| config_status         | None                                  |
| config_target         | 590f29ad-19e2-43ee-855e-f765814e3ecd  |
| console               | ttyS0,115200n8                        |
| created_at            | 2019-12-07T18:32:58.752361+00:00      |
| hostname              | controller-0                          |
| id                    | 1                                     |
| install_output        | text                                  |
| install_state         | None                                  |
| install_state_info    | None                                  |
| inv_state             | inventoried                           |
| invprovision          | provisioned                           |
| location              | {}                                    |
| mgmt_ip               | 192.168.204.3                         |
| mgmt_mac              | 00:1e:67:54:aa:39                     |
| operational           | enabled                               |
| personality           | controller                            |
| reserved              | False                                 |
| rootfs_device         | /dev/disk/by-path/pci-0000:04:00.0    |
|                       |   -sas-0x5001e6754aa38000-lun-0       |
| serialid              | None                                  |
| software_load         | 20.06                                 |
| task                  |                                       |
| tboot                 | false                                 |
| ttys_dcd              | None                                  |
| updated_at            | 2019-12-07T21:17:28.627489+00:00      |
| uptime                | 9020                                  |
| uuid                  | 92c86da2-adb7-4fb2-92fc-82759e25108d  |
| vim_progress_status   | services-enabled                      |
+-----------------------+---------------------------------------+

To view the service configuration, use the following command:

~(keystone_admin)]$ system host-show controller-0
+-----------------------+------------------------------------------------+
| Property              | Value                                          |
+-----------------------+------------------------------------------------+
| action                | none                                           |
| administrative        | unlocked                                       |
| availability          | available                                      |
| bm_ip                 | None                                           |
| bm_type               | None                                           |
| bm_username           | None                                           |
| boot_device           | /dev/disk/by-path/pci-0000:04:00.0-sas         |
|                       |-0x5001e6754aa38000-lun-0                       |
| capabilities          | {u'stor_function': u'monitor', u'Personality': |
|                       | u'Controller-Active'}                          |
| clock_synchronization | ptp                                            |
| config_applied        | 590f29ad-19e2-43ee-855e-f765814e3ecd           |
| config_status         | Config out-of-date                             |
| config_target         | cd18ec25-c030-4b0c-862b-c39726275743           |
| console               | ttyS0,115200n8                                 |
| created_at            | 2019-12-09T16:10:19.143372+00:00               |
| hostname              | controller-0                                   |
| id                    | 1                                              |
| install_output        | text                                           |
| install_state         | None                                           |
| install_state_info    | None                                           |
| inv_state             | inventoried                                    |
| invprovision          | provisioned                                    |
| location              | {}                                             |
| mgmt_ip               | 192.168.204.3                                  |
| mgmt_mac              | 00:1e:67:54:aa:39                              |
| operational           | enabled                                        |
| personality           | controller                                     |
| reserved              | False                                          |
| rootfs_device         | /dev/disk/by-path/pci-0000:04:00.0-sas         |
|                       | -0x5001e6754aa38000-lun-0                      |
| serialid              | None                                           |
| software_load         | 20.06                                          |
| task                  |                                                |
| tboot                 | false                                          |
| ttys_dcd              | None                                           |
| updated_at            | 2019-12-10T14:55:58.595239+00:00               |
| uptime                | 159970                                         |
| uuid                  | 92c86da2-adb7-4fb2-92fc-82759e25108d           |
| vim_progress_status   | services-enabled                               |
+-----------------------+------------------------------------------------+

• PTP Time Stamping Mode: and are configured per host. Lock/unlock the host when Hardware time stamping is the default option, and achieves best time synching. Use the following command:

  ~(keystone_admin)]$ system ptp-modify --mode=<hardware/software/legacy>

• PTP Network Transport: Switch between IEEE 802.3 network transport (L2) or IPv4/v6 network transport for messaging. Use the following command:

  ~(keystone_admin)]$ system ptp-modify --transport=<l2/UDP>

  Note

  L2 is the default option.

  If you use for transport, each interface must have an IP assigned. This is enforced during host unlock, and when switching transport to .

• PTP Delay Mechanism

  Set the delay mechanism, the options are:

  • E2E: default delay request-response
  • P2P: peer delay

  Use the following command:

  ~(keystone_admin)]$ system ptp-modify --mechanism=<e2e/p2p>

• PTP Role

  master/slave interfaces are not defined by default. They must be specified by the administrator for each host.

  The ptp_role option can be added to interfaces, and can be defined for master, slave, and none. This option allows administrators to configure interfaces that can be used for services. The master and slave roles are limited to platform, , and VF interfaces. Any number of master and slave interfaces can be specified per host.

  If a host has clock_synchronization=ptp, there must be at least one host interface with a role specified. This is enforced during host unlock.

  For example, this service can be specified using the following commands:

  ~(keystone_admin)]$ system host-if-modify compute-3 ens803f0 -n sriovptp --ptp-role slave

To apply changes to hosts, use the following command:

~(keystone_admin)]$ system ptp-apply

changes will be applied to all unlocked hosts configured with ptp clock_synchronization.

Advanced Configuration

Using service parameters, you can customize a wide range of linuxptp module settings to use the system in a much wider range of configurations.

Caution

These parameters are written to the ptp4l configuration file without error checking. Caution must be taken to ensure that parameter names and values are correct as errors will cause ptp4l launch failures.

The following service parameters are available:

ptp global <name>=<value>

This service parameter allows you to write or overwrite values found in the global section of the ptp4l configuration file. For example, the command

~(keystone_admin)]$ system service-parameter-add ptp global domainNumber=24

results in the following being written to the configuration file:

domainNumber 24

ptp global service parameters take precedence over the system ptp values. For example, if the system ptp delay mechanism is E2E, and you subsequently run the command

~(keystone_admin)]$ system service-parameter-add ptp global delay_mechanism=P2P

Then the P2P will be used instead.

ptp phc2sys update-rate=<value>

This parameter controls the update-rate of the phc2sys service, in seconds.

ptp phc2sys summary-updates=<value>

This parameter controls the number of clock updates to be included in summary statistics.

To apply service parameter changes to hosts, use the following command:

~(keystone_admin)]$ system service-parameter-apply ptp

changes will be applied to all unlocked hosts configured with ptp clock_synchronization.