Stone e60b972a04 Directory reorganization for FM

This update brings FM in line with directory and index structure of other content.

Signed-off-by: Stone <ronald.stone@windriver.com>
Change-Id: If730098dc3eb119defa89647b04ac9f7c8717992

2021-03-25 09:04:59 -04:00

1.2 KiB

Raw Blame History

Suppress an Alarm Using the CLI

You can use the CLI to prevent a monitored system parameter from generating unnecessary alarms.

Use the fm event-suppress to suppress a single alarm or multiple alarms by ID.
```
~(keystone_admin)$ fm event-suppress [--nowrap] --alarm id <alarm_ id>[,<alarm-id>] \
[--nopaging] [--uuid]
```
where

<alarm-id>

is a comma separated list of alarm UUIDs.

--nowrap

disables output wrapping

--nopaging

disables paged output

--uuid

includes the alarm type UUIDs in the output

An error message is generated in the case of an invalid <alarm-id>: Alarm ID not found: <alarm-id>.

If the specified number of Alarm IDs is greater than 1, and at least 1 is wrong, then the suppress command is not applied (none of the specified Alarm IDs are suppressed).

Note

Suppressing an Alarm will result in the system NOT notifying the operator of this particular fault.

1.2 KiB Raw Blame History

Suppress an Alarm Using the CLI

1.2 KiB

Raw Blame History