starlingx/docs
Code Issues Proposed changes
docs/doc/source/node_management/kubernetes/node_interfaces/configuring-ethernet-interfaces-on-sriov-interface-from-horizon.rst
Ron Stone 2b62f49a9d Fix symlinks 
Changed paths to avoid '..', which breaks symlinks in newer versions of sphinx.
Consolidated installation include files under /_includes. Prefixed r5 versions with 'r5_'
Moved files that are used up/down, but at different paths under /shared/_includes
and /shared/figures
Move two include files to /_includes
Moved addtional images to /shared/figures/... Required for DS platform builds.

Signed-off-by: Ron Stone <ronald.stone@windriver.com>
Change-Id: Ia38f4205c5803b3d1fc043e6c59617c34a4e5cbd
Signed-off-by: Ron Stone <ronald.stone@windriver.com>
2021-09-02 13:31:45 +00:00

2.1 KiB
Raw Blame History

Configure Ethernet Interfaces on SR-IOV Interface Using Horizon

You can use the Horizon web interface to configure Ethernet interfaces on .

You must create an interface before you can provision an Ethernet interface. For more information, see Provisioning SR-IOV Interfaces using the CLI <provisioning-sr-iov-interfaces-using-the-cli>.

  1. Open the Host Inventory page, available from Admin > Platform > Host Inventory in the left-hand panel, under Actions click on the down arrow button on "Edit Host" and select "Lock Host".

    image

  2. Open the Host Detail page for the host.

    1. Open the Host Inventory page, available from Admin > Platform > Host Inventory in the left-hand pane.
    2. Select the Hosts tab, and then in the Host Name column, click the name of the host.

  3. Select the Interfaces tab.

    image

  4. Open the Host Inventory page, available from Admin > Platform > Host Inventory in the left-hand panel, under Actions click on the down arrow button on "Edit Host" and select "Unlock Host".

  5. Click Create Interface.

  6. Open the Interface Class drop-down menu and select platform.

  7. Open the Interface Type drop-down menu and select ethernet.

  8. Select the Ethernet interface used to attach this interface to the network from the Interfaces(s) list.

  9. From the Platform Network(s) list, select pxeboot to which this interface is attached.

  10. Click Create Interface to save your changes and close the dialog box.

    image