Removed support for HPE ProLiant DL110 Gen10 Plus in stx 5.0/stx6.0 To be Cherry picked to stx. 5.0 Signed-off-by: Juanita-Balaraj <juanita.balaraj@windriver.com> Change-Id: Idd59f20fd45fd5ef2feebebd047905088313beac Signed-off-by: Juanita-Balaraj <juanita.balaraj@windriver.com>
89 KiB
Executable File
Kubernetes Verified Commercial Hardware
Verified and approved hardware components for use with are listed here.
Component | Approved Hardware |
---|---|
Hardware Platforms |
|
Supported Reference Platforms |
|
Disk Controllers |
|
NICs Verified for PXE Boot, Management, and OAM Networks |
|
NICs Verified for Data Interfaces | The following NICs are supported:
|
PCI-Passthrough or PCI SR-IOV NICs |
Note The maximum number of VFs per hosted application instance, across all PCI devices, is 32. For example, a hardware encryption hosted application can be launched with virtio interfaces and 32 QAT VFs. However, a hardware encryption hosted application with an SR-IOV network interface (with 1 VF) can only be launched with 31 VFs. Note Dual-use configuration (PCI passthrough or PCI SR-IOV on the same interface) is supported for Fortville NICs only. |
PCI SR-IOV Hardware Accelerators |
|
Hardware Accelerator Devices Verified for PCI-Passthrough or PCI SR-IOV Access |
|
GPUs Verified for PCI Passthrough |
|
Board Management Controllers |
|