starlingx/docs
Code Issues Proposed changes
docs/doc/source/fault-mgmt/enabling-snmp-support.rst
Stone 037c99f0b7 Fault Management doc 
Added Data Networks toctree

Changed case on doc title in top level index - changed doc directory to
fault-mgmt.

Added Distributed Cloud section.

Broke out "OpenStack Fault Management Overview" statement about remote log
collection to conditionally included file.

Incorporated patch 6 review comments. Also implemented rST :abbr:
for first instance of SNMP in each file.

Changed port number and community string in two SNMP walk examples.

Change-Id: I1afd71265e752c4c9a54bf2dc9a173b3e17332a7
Signed-off-by: Stone <ronald.stone@windriver.com>
2020-11-27 14:13:00 -05:00

845 B
Raw Blame History

Enable SNMP Support

SNMP (Simple Network Management Protocol) support must be enabled before you can begin using it to monitor a system.

In order to have a workable SNMP configuration you must use the command line interface on the active controller to complete the following steps.

  1. Define at least one SNMP community string.

    See : Adding an SNMP Community String Using the CLI <adding-an-snmp-community-string-using-the-cli> for details.

  2. Configure at least one SNMP trap destination.

    This will allow alarms and logs to be reported as they happen.

    For more information, see Configuring SNMP Trap Destinations <configuring-snmp-trap-destinations>.