starlingx/docs
Code Issues Proposed changes
eb52adae9c
docs/doc/source/deploy_install_guides/bootable_usb.rst
Scott Little 31f97de261 cengn reference removal 
mirror.starlingx.cengn.ca no longer exists. CENGN is kindly forwarding
requests to the new location mirror.starlingx.windriver.com for now, but
that will only last a few months. We need to replace all the references
with the new URL.

I will also remove as many 'cengn' references as possible, replacing
them with 'stx_mirror'

Partial-Bug: 2033555
Change-Id: I7573f2d1b6cffa749c983492bae536bf13ba05cb
Signed-off-by: Scott Little <scott.little@windriver.com>
2023-09-14 10:51:26 -04:00

3.8 KiB
Raw Blame History

Create Bootable USB

Follow the instructions for your system to create a bootable USB with the StarlingX ISO:

  • bootable-usb-linux
  • bootable-usb-mac
  • bootable-usb-windows

Create a bootable USB drive on Linux*

  1. Open a terminal and get root privilege:

    sudo -s

  2. Get the latest StarlingX ISO from the StarlingX mirror. Alternately, you can get an older release ISO from here.

  3. Navigate to the directory with the StarlingX ISO.

  4. Plug in the USB drive and get its identifier:

    lsblk

    This will list available disks and their partitions.

  5. Unmount the USB drive before burning an image onto it. (Note that some Linux distros automatically mount a USB drive when it is plugged in.) For example:

    umount /dev/sdd2

  6. Burn the StarlingX bootimage.iso onto the USB drive:

    dd if=</path/to/bootimage.iso> of=<your USB device> bs=1M status=progress

Caution

Not fully unmounting the USB drive before burning an image can cause file system checksum errors. If this happens, burn the image again, ensuring all the USB drive partitions are unmounted first.

Create a bootable USB drive on macOS*

  1. Launch the Terminal app.

  2. Get the latest StarlingX ISO from the StarlingX mirror. Alternately, you can get an older release ISO from here.

  3. Navigate to the directory with the ISO.

  4. Plug in a USB drive and get its identifier:

    diskutil list

    This will list available disks and their partitions.

  5. Unmount the USB drive identified in the previous step. For example:

    diskutil umountDisk /dev/disk2

  6. Burn the StarlingX bootimage.iso onto the USB drive. The example below burns an ISO onto `<your USB device>`:

    sudo dd if=</path/to/bootimage.iso> of=<your USB device> bs=1m

    To speed up the imaging process, add an ‘r’ in front of the disk identifier. For example /dev/rdisk2.

    Press <CTL>-T to check imaging progress.

  7. Eject the USB drive.

    diskutil eject /dev/disk2

Create a bootable USB drive on Windows*

  1. Get the latest StarlingX ISO from the StarlingX mirror. Alternately, you can get an older release ISO from here.
  2. Download the Rufus utility to burn the image onto a USB drive. Only use the latest version of Rufus.
  3. Plug in the USB drive and open Rufus.
  4. Under Boot selection, click the SELECT button.
  5. Find and select the StarlingX ISO.
  6. Click the START button.
  7. When the dialogue appears, select Write in ISO image mode (Recommended).
  8. Select the Windows taskbar menu for USB and select eject.