browbeat/README.rst
akrzos b95cbeda49 Make Browbeat multi-cloud friendly.
This commit "localizes" ssh-config and heat-admin-id_rsa to your local
Browbeat directory.

This allows one to simply cd into the directory of the cloud they are
working with Browbeat against and ensure they do not incorrectly run
playbooks against the wrong hosts.

Example:

[akrzos@bithead ansible]$ ./generate_tripleo_hostfile.sh x.x.x.x
...
[akrzos@bithead ansible]$ ls -la
...
-rwxrwxr-x.  1 akrzos akrzos 9461 Aug 25 16:18 generate_tripleo_hostfile.sh
-rw-------.  1 akrzos akrzos 1675 Aug 27 14:16 heat-admin-id_rsa
-rw-rw-r--.  1 akrzos akrzos  338 Aug 27 14:16 hosts
-rw-------.  1 akrzos akrzos 2013 Aug 27 14:16 ssh-config
...
[akrzos@bithead ansible]$ ssh -F ssh-config  root@undercloud
[root@gprfc007 ~]# exit
logout
[akrzos@bithead ansible]$ ssh -F ssh-config  undercloud-stack
[stack@gprfc007 ~]$ exit
logout
[akrzos@bithead ansible]$ ssh -F ssh-config  undercloud-root
[root@gprfc007 ~]# exit
logout
[akrzos@bithead ansible]$ ssh -F ssh-config  overcloud-controller-0
Warning: Permanently added '10.16.154.18' (ECDSA) to the list of known hosts.
Warning: Permanently added 'overcloud-controller-0' (ECDSA) to the list of known hosts.
[heat-admin@overcloud-controller-0 ~]$ exit
logout
[akrzos@bithead ansible]$ ssh -F ssh-config  overcloud-controller-1
[heat-admin@overcloud-controller-1 ~]$ exit
logout
[akrzos@bithead ansible]$ ssh -F ssh-config  overcloud-controller-2
[heat-admin@overcloud-controller-2 ~]$ exit
logout
[akrzos@bithead ansible]$ ssh -F ssh-config  overcloud-novacompute-0
[heat-admin@overcloud-novacompute-0 ~]$ exit
logout
[akrzos@bithead ansible]$ ansible-playbook -i hosts install/collectd-openstack.yml
...

Tested against the collectd-openstack and grafana-dashboards playbooks

Potential issues:

CI? (Does CI execute any playbooks from the ansible directory?  If so
we shouldn't have an issue here.)

lib/{ansible/adjustments} - Can we make sure to pass the either the
correct ssh-config or use the ansible.cfg inside ansible/?

Change-Id: I4764490e5164f7d4d896cbe5bd26e6a59d770df4
2016-08-30 21:09:47 -04:00

13 KiB

Table of Contents

Browbeat

This started as a project to help determine the number of database connections a given OpenStack deployment uses via stress tests. It has since grown into a set of Ansible playbooks to help check deployments for known issues, install tools, run performance stress workloads and change parameters of the overcloud.

Before running browbeat

  • Execute the ansible/generate_tripleo_hostfile.sh script (builds the ssh config)
  • Configure browbeat-config.yaml to match your tests

How to run Browbeat Stress Tests?

On the Undercloud host, as the Stack user jump into the browbeat venv and you simply run:

(browbeat-venv)[stack@ospd browbeat]$ ./browbeat.py --help

However, the playbook required to install browbeat and its dependencies(Rally, Shaker, Perfkit) needs to be run before this. DEtailed install and run instructions are presented in a section below.

What is necessary?

  • Ansible

    Why? We started with using bash to make changes to the Overcloud, creating complex sed/awks that we get for free with Ansible (for the most part). Other monitoring and stress test tools are installed by the respective playbooks when run.

Detailed Install, Check and Run

Installing Browbeat and running the Overcloud checks can be performed either from your local machine or from the undercloud. The local machine install/check assumes you have ansible installed already.

Install Browbeat from your local machine

From your local machine

$ ssh-copy-id stack@<undercloud-ip>
$ git clone https://github.com/openstack/browbeat.git
$ cd browbeat/ansible
$ ./generate_tripleo_hostfile.sh <undercloud-ip>
$ vi install/group_vars/all.yml # Make sure to edit the dns_server to the correct ip address
$ ansible-playbook -i hosts install/browbeat.yml
$ vi install/group_vars/all.yml # Edit browbeat network settings
$ ansible-playbook -i hosts install/browbeat_network.yml
$ ansible-playbook -i hosts install/shaker_build.yml

(Optional) Install collectd

$ ansible-playbook -i hosts install/collectd-openstack.yml

(Optional) Install collectd->graphite dashboards

$ ansible-playbook -i hosts install/dashboards-openstack.yml

(Optional) Install connmon

$ ansible-playbook -i hosts install/connmon.yml

Run Overcloud checks

$ ansible-playbook -i hosts check/site.yml

Your Overcloud check output is located in check/bug_report.log

NOTE: It is strongly advised to not run the ansible playbooks in a venv.

Run performance stress tests through browbeat on the undercloud:

$ ssh undercloud-root
[root@ospd ~]# su - stack
[stack@ospd ~]$ screen -S browbeat
[stack@ospd ~]$ . browbeat-venv/bin/activate
(browbeat-venv)[stack@ospd ~]$ cd browbeat/
(browbeat-venv)[stack@ospd browbeat]$ vi browbeat-config.yaml # Edit browbeat-config.yaml to control how many stress tests are run.
(browbeat-venv)[stack@ospd browbeat]$ ./browbeat.py <workload> #perfkit, rally, shaker or "all"

Install Browbeat directly on undercloud

From your undercloud

$ ssh undercloud-root
[root@ospd ~]# su - stack
[stack@ospd ~]$ git clone https://github.com/openstack/browbeat.git
[stack@ospd ~]$ cd browbeat/ansible
[stack@ospd ansible]$ ./generate_tripleo_hostfile.sh localhost
[stack@ospd ansible]$ sudo easy_install pip
[stack@ospd ansible]$ sudo pip install ansible
[stack@ospd ansible]$ vi install/group_vars/all.yml # Make sure to edit the dns_server to the correct ip address
[stack@ospd ansible]$ ansible-playbook -i hosts install/browbeat.yml
[stack@ospd ansible]$ vi install/group_vars/all.yml # Edit browbeat network settings
[stack@ospd ansible]$ ansible-playbook -i hosts install/browbeat_network.yml
[stack@ospd ansible]$ ansible-playbook -i hosts install/shaker_build.yml

(Optional) Install collectd

[stack@ospd ansible]$ ansible-playbook -i hosts install/collectd-openstack.yml

(Optional) Install collectd->graphite dashboards

[stack@ospd ansible]$ ansible-playbook -i hosts install/dashboards-openstack.yml

(Optional) Install connmon

[stack@ospd ansible]$ ansible-playbook -i hosts install/connmon.yml

Run Overcloud checks

[stack@ospd ansible]$ ansible-playbook -i hosts check/site.yml

Your Overcloud check output is located in check/bug_report.log

Run performance stress tests through browbeat

[stack@ospd ansible]$ . ../../browbeat-venv/bin/activate
(browbeat-venv)[stack@ospd ansible]$ cd ..
(browbeat-venv)[stack@ospd browbeat]$ vi browbeat-config.yaml # Edit browbeat.cfg to control how many stress tests are run.
(browbeat-venv)[stack@ospd browbeat]$ ./browbeat.py <workload> #perfkit, rally, shaker or "all"

Running PerfKitBenchmarker

Work is on-going to utilize PerfKitBenchmarker as a workload provider to browbeat. Many benchmarks work out of the box with browbeat. You must ensure that your network is setup correctly to run those benchmarks and you will need to configure the settings in ansible/install/group_vars/all.yml for browbeat public/private networks. Currently tested benchmarks include: aerospike, bonnie++, cluster_boot, copy_throughput(cp,dd,scp), fio, iperf, mesh_network, mongodb_ycsb, netperf, object_storage_service, ping, scimark2, and sysbench_oltp.

To run browbeat's PerfKit Benchmarks, you can start by viewing the tested benchmark's configuration in conf/browbeat-perfkit-complete.yaml. You must add them to your specific browbeat config yaml file or enable/disable the benchmarks you wish to run in the default config file (browbeat-config.yaml). There are many flags exposed in the configuration files to tune how those benchmarks run. Additional flags are exposed in the source code of PerfKitBenchmarker available on the Google Cloud Github.

Example running only PerfKitBenchmarker benchmarks with browbeat from browbeat-config.yaml:

(browbeat-venv)[stack@ospd browbeat]$ ./browbeat.py  perfkit -s browbeat-config.yaml

Working with Multiple Clouds

If you are running playbooks from your local machine you can run against more than one cloud at the same time. To do this, you should create a directory per-cloud and clone browbeat into that specific directory:

[browbeat@laptop ~]$ mkdir cloud01; cd cloud01
[browbeat@laptop cloud01]$ git clone git@github.com:openstack/browbeat.git
...
[browbeat@laptop cloud01]$ cd browbeat/ansible
[browbeat@laptop ansible]$ ./generate_tripleo_hostfile.sh <cloud01-ip-address>
[browbeat@laptop ansible]$ ansible-playbook -i hosts (Your playbook you wish to run...)
[browbeat@laptop ansible]$ ssh -F ssh-config overcloud-controller-0  # Takes you to first controller

Repeat the above steps for as many clouds as you have to run playbooks against your clouds.

Contributing

Contributions are most welcome! You must first create a Launchpad account and follow the instructions here to get started as a new OpenStack contributor.

Once you've signed the contributor license agreement and read through the above documentation, add your public SSH key under the 'SSH Public Keys' section of review.openstack.org.

You can view your public key using:

$ cat ~/.ssh/id_*.pub

Set your username and email for review.openstack.org:

$ git config --global user.email "example@example.com"
$ git config --global user.name "example"
$ git config --global --add gitreview.username "example"

Next, Clone the github repository:

$ git clone https://github.com/openstack/browbeat.git

You need to have git-review in order to be able to submit patches using the gerrit code review system. You can install it using:

$ sudo yum install git-review

To set up your cloned repository to work with OpenStack Gerrit

$ git review -s

It's useful to create a branch to do your work, name it something related to the change you'd like to introduce.

$ cd browbeat
$ git branch my_special_enhancement
$ git checkout !$

Make your changes and then commit them using the instructions below.

$ git add /path/to/files/changed
$ git commit

Use a descriptive commit title followed by an empty space. You should type a small justification of what you are changing and why.

Now you're ready to submit your changes for review:

$ git review

If you want to make another patchset from the same commit you can use the ammend feature after further modification and saving.

$ git add /path/to/files/changed
$ git commit --amend
$ git review

If you want to submit a new patchset from a different location (perhaps on a different machine or computer for example) you can clone the browbeat repo again (if it doesn't already exist) and then use git review against your unique Change-ID:

$ git review -d Change-Id

Change-Id is the change id number as seen in Gerrit and will be generated after your first successful submission.

The above command downloads your patch onto a seperate branch. You might need to rebase your local branch with remote master before running it to avoid merge conflicts when you resubmit the edited patch. To avoid this go back to a "safe" commit using:

$ git reset --hard commit-number

Then,

$ git fetch origin
$ git rebase origin/master

Make the changes on the branch that was setup by using the git review -d (the name of the branch is along the lines of review/username/branch_name/patchsetnumber).

Add the files to git and commit your changes using,

$ git commit --amend

You can edit your commit message as well in the prompt shown upon executing above command.

Finally, push the patch for review using,

$ git review

Adding functionality

If you are adding new functionality to Browbeat please add testing for that functionality in.

$ ci-scripts/install-and-check.sh

See the README.rst in the ci-scripts folder for more details on the structure of the script and how to add additional tests.

Resources