vmware-nsx/doc/source/devstack.rst

NSX DevStack Configurations

Below are the options for configuring the NSX plugin with DevStack. Prior to doing this DevStack needs to be downloaded. After updating the relevant configuration file(s) run ./stack.sh

NSX-V

QoS Driver

Enable the qos in local.conf:

[[local|localrc]]
ENABLED_SERVICES+=,q-qos
Q_SERVICE_PLUGIN_CLASSES+=,vmware_nsxv_qos
NSXV_USE_DVS_FEATURES = True

Optional: Update the nsx qos_peak_bw_multiplier in nsx.ini (default value is 2.0):

[NSX]
qos_peak_bw_multiplier = <i.e 10.0>

FWaaS (V2) Driver

Add neutron-fwaas repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_service q-fwaas-v2
Q_SERVICE_PLUGIN_CLASSES+=,firewall_v2

[[post-config|$NEUTRON_FWAAS_CONF]]
[fwaas]
enabled = True
driver = vmware_nsxv_edge_v2

[service_providers]
service_provider = FIREWALL_V2:fwaas_db:neutron_fwaas.services.firewall.service_drivers.agents.agents.FirewallAgentDriver:default

L2GW Driver

Add networking-l2gw repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_plugin networking-l2gw https://github.com/openstack/networking-l2gw
ENABLED_SERVICES+=l2gw-plugin
NETWORKING_L2GW_SERVICE_DRIVER=L2GW:vmware-nsx-l2gw:vmware_nsx.services.l2gateway.nsx_v.driver.NsxvL2GatewayDriver:default

IPAM Driver

Update the local.conf file:

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
ipam_driver = vmware_nsxv_ipam

Flow Classifier

Update the local.conf file:

[[local|localrc]]
enable_plugin networking-sfc https://opendev.org/openstack/networking-sfc master
Q_SERVICE_PLUGIN_CLASSES+=,networking_sfc.services.flowclassifier.plugin.FlowClassifierPlugin

[[post-config|$NEUTRON_CONF]]
[flowclassifier]
drivers = vmware-nsxv-sfc

[nsxv]
service_insertion_profile_id = <service profile id. i.e. serviceprofile-1>

In order to prevent tenants from changing the flow classifier, please add the following lines to the policy.json file:

"create_flow_classifier": "rule:admin_only",
"update_flow_classifier": "rule:admin_only",
"delete_flow_classifier": "rule:admin_only",
"get_flow_classifier": "rule:admin_only"

Neutron dynamic routing plugin (bgp)

Add neutron-dynamic-routing repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_plugin neutron-dynamic-routing https://opendev.org/openstack/neutron-dynamic-routing
DR_MODE=dr_plugin
BGP_PLUGIN=vmware_nsx.services.dynamic_routing.bgp_plugin.NSXvBgpPlugin

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
api_extensions_path = $DEST/neutron-dynamic-routing/neutron_dynamic_routing/extensions

Neutron VPNaaS

Add neutron-vpnaas repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_plugin neutron-vpnaas https://opendev.org/openstack/neutron-vpnaas
NEUTRON_VPNAAS_SERVICE_PROVIDER=VPN:vmware:vmware_nsx.services.vpnaas.nsxv.ipsec_driver.NSXvIPsecVpnDriver:default

Octavia

Add octavia and python-octaviaclient repos as external repositories and configure following flags in local.conf:

[[local|localrc]]
OCTAVIA_NODE=api
DISABLE_AMP_IMAGE_BUILD=True
LIBS_FROM_GIT=python-openstackclient,python-octaviaclient
enable_plugin octavia https://opendev.org/openstack/octavia.git
enable_plugin octavia-dashboard https://opendev.org/openstack/octavia-dashboard
enable_service octavia
enable_service o-api,o-da

[[post-config|$OCTAVIA_CONF]]
[DEFAULT]
verbose = True
debug = True

[api_settings]
default_provider_driver=vmwareedge
enabled_provider_drivers=vmwareedge:NSX

[oslo_messaging]
topic=vmwarensxv_edge_lb

[controller_worker]
network_driver = allowed_address_pairs_driver

NSX-T

QoS Driver

Enable the qos in local.conf:

[[local|localrc]]
ENABLED_SERVICES+=,q-qos
Q_SERVICE_PLUGIN_CLASSES+=,neutron.services.qos.qos_plugin.QoSPlugin

Optional: Update the nsx qos_peak_bw_multiplier in nsx.ini (default value is 2.0):

[NSX]
qos_peak_bw_multiplier = <i.e 10.0>

L2GW Driver

Add networking-l2gw repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_plugin networking-l2gw https://github.com/openstack/networking-l2gw
ENABLED_SERVICES+=l2gw-plugin
NETWORKING_L2GW_SERVICE_DRIVER=L2GW:vmware-nsx-l2gw:vmware_nsx.services.l2gateway.nsx_v3.driver.NsxV3Driver:default
DEFAULT_BRIDGE_CLUSTER_UUID=

IPAM Driver

Update the local.conf file:

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
ipam_driver = vmware_nsxv3_ipam

Trunk Driver

Enable trunk service and configure following flags in local.conf:

[[local]|[localrc]]
# Trunk plugin NSX-T driver config
ENABLED_SERVICES+=,q-trunk
Q_SERVICE_PLUGIN_CLASSES+=,trunk

FWaaS (V2) Driver

Add neutron-fwaas repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_service q-fwaas-v2
Q_SERVICE_PLUGIN_CLASSES+=,firewall_v2

[[post-config|$NEUTRON_FWAAS_CONF]]
[fwaas]
enabled = True
driver = vmware_nsxv3_edge_v2

[service_providers]
service_provider = FIREWALL_V2:fwaas_db:neutron_fwaas.services.firewall.service_drivers.agents.agents.FirewallAgentDriver:default

Neutron VPNaaS

Add neutron-vpnaas repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
NEUTRON_VPNAAS_SERVICE_PROVIDER=VPN:vmware:vmware_nsx.services.vpnaas.nsxv3.ipsec_driver.NSXv3IPsecVpnDriver:default
Q_SERVICE_PLUGIN_CLASSES+=,vmware_nsx_vpnaas

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
api_extensions_path = $DEST/neutron-vpnaas/neutron_vpnaas/extensions

Octavia

Add octavia and python-octaviaclient repos as external repositories and configure following flags in local.conf:

[[local|localrc]]
OCTAVIA_NODE=api
DISABLE_AMP_IMAGE_BUILD=True
LIBS_FROM_GIT=python-openstackclient,python-octaviaclient
enable_plugin octavia https://opendev.org/openstack/octavia.git
enable_plugin octavia-dashboard https://opendev.org/openstack/octavia-dashboard
enable_service octavia
enable_service o-api,o-da

[[post-config|$OCTAVIA_CONF]]
[DEFAULT]
verbose = True
debug = True

[api_settings]
default_provider_driver=vmwareedge
enabled_provider_drivers=vmwareedge:NSX

[oslo_messaging]
topic=vmwarensxv_edge_lb

[controller_worker]
network_driver = allowed_address_pairs_driver

NSX-P

QoS Driver

Enable the qos in local.conf:

[[local|localrc]]
ENABLED_SERVICES+=,q-qos
Q_SERVICE_PLUGIN_CLASSES+=,neutron.services.qos.qos_plugin.QoSPlugin

Optional: Update the nsx qos_peak_bw_multiplier in nsx.ini (default value is 2.0):

[NSX]
qos_peak_bw_multiplier = <i.e 10.0>

FWaaS (V2) Driver

Add neutron-fwaas repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_service q-fwaas-v2
Q_SERVICE_PLUGIN_CLASSES+=,firewall_v2

[[post-config|$NEUTRON_FWAAS_CONF]]
[fwaas]
enabled = True
driver = vmware_nsxp_edge_v2

[service_providers]
service_provider = FIREWALL_V2:fwaas_db:neutron_fwaas.services.firewall.service_drivers.agents.agents.FirewallAgentDriver:default

Octavia

Add octavia and python-octaviaclient repos as external repositories and configure following flags in local.conf:

[[local|localrc]]
OCTAVIA_NODE=api
DISABLE_AMP_IMAGE_BUILD=True
LIBS_FROM_GIT=python-openstackclient,python-octaviaclient
enable_plugin octavia https://opendev.org/openstack/octavia.git
enable_plugin octavia-dashboard https://opendev.org/openstack/octavia-dashboard
enable_service octavia
enable_service o-api,o-da

[[post-config|$OCTAVIA_CONF]]
[DEFAULT]
verbose = True
debug = True

[api_settings]
default_provider_driver=vmwareedge
enabled_provider_drivers=vmwareedge:NSX

[oslo_messaging]
topic=vmwarensxv_edge_lb

[controller_worker]
network_driver = allowed_address_pairs_driver

Neutron VPNaaS

Add neutron-vpnaas repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
NEUTRON_VPNAAS_SERVICE_PROVIDER=VPN:vmware:vmware_nsx.services.vpnaas.nsxp.ipsec_driver.NSXpIPsecVpnDriver:default
Q_SERVICE_PLUGIN_CLASSES+=,vmware_nsx_vpnaas

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
api_extensions_path = $DEST/neutron-vpnaas/neutron_vpnaas/extensions

NSX-TVD

FWaaS (V2) Driver

Add neutron-fwaas repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_service q-fwaas-v2
Q_SERVICE_PLUGIN_CLASSES+=,vmware_nsxtvd_fwaasv2

[DEFAULT]
api_extensions_path = $DEST/neutron-fwaas/neutron_fwaas/extensions

[[post-config|$NEUTRON_FWAAS_CONF]]
[fwaas]
enabled = True
driver = vmware_nsxtvd_edge_v2

[service_providers]
service_provider = FIREWALL_V2:fwaas_db:neutron_fwaas.services.firewall.service_drivers.agents.agents.FirewallAgentDriver:default

L2GW Driver

Add networking-l2gw repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_plugin networking-l2gw https://github.com/openstack/networking-l2gw
ENABLED_SERVICES+=l2gw-plugin
NETWORKING_L2GW_SERVICE_DRIVER=L2GW:vmware-nsx-l2gw:vmware_nsx.services.l2gateway.nsx_tvd.driver.NsxTvdL2GatewayDriver:default
DEFAULT_BRIDGE_CLUSTER_UUID=
Q_SERVICE_PLUGIN_CLASSES+=,vmware_nsxtvd_l2gw

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
api_extensions_path = $DEST/networking-l2gateway/networking_l2gw/extensions

QoS Driver

Enable the qos in local.conf:

[[local|localrc]]
ENABLED_SERVICES+=,q-qos
Q_SERVICE_PLUGIN_CLASSES+=,vmware_nsxtvd_qos

Neutron dynamic routing plugin (bgp)

Add neutron-dynamic-routing repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_plugin neutron-dynamic-routing https://opendev.org/openstack/neutron-dynamic-routing
DR_MODE=dr_plugin
BGP_PLUGIN=vmware_nsx.services.dynamic_routing.bgp_plugin.NSXBgpPlugin

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
api_extensions_path = $DEST/neutron-dynamic-routing/neutron_dynamic_routing/extensions

Neutron VPNaaS

Add neutron-vpnaas repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_plugin neutron-vpnaas https://opendev.org/openstack/neutron-vpnaas
NEUTRON_VPNAAS_SERVICE_PROVIDER=VPN:vmware:vmware_nsx.services.vpnaas.nsx_tvd.ipsec_driver.NSXIPsecVpnDriver:default
Q_SERVICE_PLUGIN_CLASSES+=,vmware_nsxtvd_vpnaas

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
api_extensions_path = $DEST/neutron-vpnaas/neutron_vpnaas/extensions

IPAM Driver

Update the local.conf file:

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
ipam_driver = vmware_nsxtvd_ipam