x/vmware-nsx
Code Issues Proposed changes
d85dd105b8
vmware-nsx/doc/source/devstack.rst
Gary Kotton 01d33ffa65 Integration with new neutron code 
1. Use new enginefacade + l3_db breakage
Use reader and writer for db operations.
Partially-Implements blueprint: enginefacade-switch

2. Fix the callback pass for _prevent_l3_port_delete_callback
which was changed in commit Ia8ac4f510c003667cac95f76dea0e9ae55159878

3. QoS driver integration
Commit I5f747635be3fd66b70326d9f94c85a6736286bd2 removes the qos
notification driver.
Fixing the nsx-v and nsx-v3 to work only with the regular driver

4. _get_extra_routes_dict_by_router_id was removed by
Ia815d6c597730bd5cb49455e7409ca747a4cc22c

5. Floating IP association without subnet gateway IP
not supported by our plugins.
Added in commit If212c36d918ed57400a53f4b5fa1925b3d1fa6fd

Co-Authored-by: Adit Sarfaty <asarfaty@vmware.com>
Change-Id: I277ec5c38c5895337011019f71d586b254bfafde
2017-04-18 18:56:05 +03:00

4.6 KiB
Raw Blame History

NSX DevStack Configurations

Below are the options for configuring the NSX plugin with DevStack. Prior to doing this DevStack needs to be downloaded. After updating the relevant configuration file(s) run ./stack.sh

NSXv

LBaaS v2 Driver

Add lbaas repo as an external repository and configure following flags in local.conf:

[[local]|[localrc]]
enable_plugin neutron-lbaas https://git.openstack.org/openstack/neutron-lbaas
enable_service q-lbaasv2
Configure the service provider::

post-config [service_providers] service_provider = LOADBALANCERV2:VMWareEdge:neutron_lbaas.drivers.vmware.edge_driver_v2.EdgeLoadBalancerDriverV2:default

QoS Driver

Enable the qos in local.conf:

[[local|localrc]]
ENABLED_SERVICES=q-qos

For NSXv set the service plugin in local.conf, and enable the dvs features:

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
service_plugins = vmware_nsxv_qos

[[local|localrc]]
NSXV_USE_DVS_FEATURES = True

Optional: Update the nsx qos_peak_bw_multiplier in nsx.ini (default value is 2.0):

[NSX]
qos_peak_bw_multiplier = <i.e 10.0>

L2GW Driver

Add networking-l2gw repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_plugin networking-l2gw https://github.com/openstack/networking-l2gw
ENABLED_SERVICES+=l2gw-plugin
NETWORKING_L2GW_SERVICE_DRIVER=L2GW:vmware-nsx-l2gw:vmware_nsx.services.l2gateway.nsx_v.driver.NsxvL2GatewayDriver:default

IPAM Driver

Update the local.conf file:

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
ipam_driver = vmware_nsxv_ipam

Flow Classifier

Update the local.conf file:

[[local|localrc]]
enable_plugin networking-sfc https://git.openstack.org/openstack/networking-sfc master

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
service_plugins = networking_sfc.services.flowclassifier.plugin.FlowClassifierPlugin

[flowclassifier]
drivers = vmware-nsxv-sfc

[nsxv]
service_insertion_profile_id = <service profile id. i.e. serviceprofile-1>

In order to prevent tenants from changing the flow classifier, please add the following lines to the policy.json file:

"create_flow_classifier": "rule:admin_only",
"update_flow_classifier": "rule:admin_only",
"delete_flow_classifier": "rule:admin_only",
"get_flow_classifier": "rule:admin_only"

FWAAS (V1) Driver: ~~~~~~~~~~~~~

Add neutron-fwaas repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_plugin neutron-fwaas https://git.openstack.org/openstack/neutron-fwaas
ENABLED_SERVICES+=,q-fwaas

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
service_plugins = neutron_fwaas.services.firewall.fwaas_plugin.FirewallPlugin

[fwaas]
enabled = True
driver = vmware_nsx.services.fwaas.nsx_v.edge_fwaas_driver.EdgeFwaasDriver

Neutron dynamic routing plugin (bgp)

Add neutron-dynamic-routing repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_plugin neutron-dynamic-routing https://git.openstack.org/openstack/neutron-dynamic-routing
DR_MODE=dr_plugin

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
api_extensions_path = $DEST/neutron-dynamic-routing/neutron_dynamic_routing/extensions

NSXv3

QoS Driver

Enable the qos in local.conf:

[[local|localrc]]
ENABLED_SERVICES=q-qos

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
service_plugins = neutron.services.qos.qos_plugin.QoSPlugin

Optional: Update the nsx qos_peak_bw_multiplier in nsx.ini (default value is 2.0):

[NSX]
qos_peak_bw_multiplier = <i.e 10.0>

L2GW Driver

Add networking-l2gw repo as an external repository and configure following flags in local.conf:

[[local|localrc]]
enable_plugin networking-l2gw https://github.com/openstack/networking-l2gw
ENABLED_SERVICES+=l2gw-plugin
NETWORKING_L2GW_SERVICE_DRIVER=L2GW:vmware-nsx-l2gw:vmware_nsx.services.l2gateway.nsx_v3.driver.NsxV3Driver:default
DEFAULT_BRIDGE_CLUSTER_UUID=

IPAM Driver

Update the local.conf file:

[[post-config|$NEUTRON_CONF]]
[DEFAULT]
ipam_driver = vmware_nsxv3_ipam

Trunk Driver

Enable trunk service and configure following flags in local.conf:

[[local]|[localrc]]
# Trunk plugin NSXv3 driver config
ENABLED_SERVICES+=,q-trunk
Q_SERVICE_PLUGIN_CLASSES=trunk